section i: physical measures (respondent)
==========================================================================================
hrs 2016 final release
note to users: this codebook is designed to match the distribution dataset.
codebook metadata are derived from the data collection instrument.
if you have questions concerning codebook layout or content please bring
them to the attention of the hrs staff at hrsquestions@umich.edu.
printing recommendation: set margins (left/right/top/bottom) to .5 inch; print
in portrait orientation using a mono-space 10-point font.
==========================================================================================
hhid household identification number
section: i level: respondent type: character width: 6 decimals: 0
.................................................................................
20912 010001-959738. household identification number
n respondent person identification number
section: i level: respondent type: character width: 3 decimals: 0
.................................................................................
11991 010. person identifier
696 011. person identifier
33 012. person identifier
1 013. person identifier
6697 020. person identifier
214 021. person identifier
18 022. person identifier
1 023. person identifier
432 030. person identifier
47 031. person identifier
4 032. person identifier
1 033. person identifier
719 040. person identifier
51 041. person identifier
6 042. person identifier
1 043. person identifier
subhh 2016 sub household identification number
section: i level: respondent type: character width: 1 decimals: 0
.................................................................................
19158 0. original sample household - no split from divorce or
separation of spouses or partners
869 1. split household - one half of couple from subhh 0 and new
spouse or partner, if any
691 2. split household - one half of couple from subhh 0 and new
spouse or partner, if any
66 5. split household - one half of couple from subhh 1 or 2
7 6. split household - one half of couple from subhh 1 or 2
120 7. reunited household - respondents from split household
reunite
1 8. split household - one half of couple from subhh 1 or 2
osubhh 2014 sub household identification number
section: i level: respondent type: character width: 1 decimals: 0
.................................................................................
14933 0. original sample household - no split from divorce or
separation of spouses or partners
773 1. split household - one half of couple from subhh 0 and new
spouse or partner, if any
627 2. split household - one half of couple from subhh 0 and new
spouse or partner, if any
55 5. split household - one half of couple from subhh 1 or 2
6 6. split household - one half of couple from subhh 1 or 2
99 7. reunited household - respondents from split household
reunite
1 8. split household - one half of couple from subhh 1 or 2
4418 blank. new cohort hh
pn_sp 2016 spouse/partner person number
section: i level: respondent type: character width: 3 decimals: 0
.................................................................................
5750 010. person identifier
503 011. person identifier
27 012. person identifier
1 013. person identifier
5435 020. person identifier
175 021. person identifier
14 022. person identifier
1 023. person identifier
255 030. person identifier
29 031. person identifier
1 032. person identifier
1 033. person identifier
454 040. person identifier
38 041. person identifier
3 042. person identifier
2 043. person identifier
8 810. spouse of original r, never entered sample
36 811. spouse of non-original respondent
3 812. spouse of non-original respondent
6 821. spouse of non-original respondent
2 822. spouse of non-original respondent
3 831. spouse of non-original respondent
2 832. spouse of non-original respondent
4 841. spouse of non-original respondent
8159 blank. single respondent household
csr 2016 whether coversheet respondent
section: i level: respondent type: numeric width: 1 decimals: 0
.................................................................................
15018 1. yes
55 3. 2nd coverscreen r, answers not retained
5839 5. no
famr 2016 whether family respondent
section: i level: respondent type: numeric width: 1 decimals: 0
.................................................................................
14561 1. family r
25 3. 2nd family r, answers not retained
6326 5. non-family r
finr 2016 whether financial respondent
section: i level: respondent type: numeric width: 1 decimals: 0
.................................................................................
14766 1. financial r
25 3. 2nd financial r, answers not retained
6121 5. non-financial r
nurshm 2016 nursing home status-tracker
section: i level: respondent type: numeric width: 1 decimals: 0
user note: pnurshm is a tracker file variable that is used to build ppmelig
(physical measures eligibility). please be advised pnurshm is used because there
is additional evaluation after the field period to determine the nursing home
status of respondents. for this reason pnurshm is used in place of the
coverscreen variable that controls the flow of the interview.
.................................................................................
429 1. interviewed in nursing home this wave
20483 5. interviewed in community this wave
blank. inap (inapplicable); partial interview
pmelig 2016 physical measures eligibility
section: i level: respondent type: numeric width: 1 decimals: 0
.................................................................................
8887 1. eligible for physical measures and biomarkers
219 5. not eligible for physical measures and biomarkers; nursing
home resident
313 6. not eligible for physical measures and biomarkers; proxy
interview
819 7. not eligible for physical measures and biomarkers; self
interview by telephone
10674 blank. assigned to enhanced face-to-face in 2018
i800 physical measures ftf iw
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.i800_ftf
iwer: enter current mode of interview
.................................................................................
7115 1. phone
12814 2. f-t-f
983 blank. inap (inapplicable); partial interview
i800a physical measures ftf iw
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.i800_ftf
iwer: enter current mode of interview
user note: due to an issue with the survey utility, a portion of respondents
were reassigned an incorrect mode for pi800 later in the interview, even though
they had completed the section in the correct mode. this variable represents
the correct mode.
.................................................................................
6910 1. phone
12785 2. f-t-f
1217 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i800_ftf
if ((pirtab1x090_prefmode_v = enhancedftf) and (seci.i800_ftf = ftf)) and
(pisecarelationsa028_rinnhome <> yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i846 physical measures intro
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.i846_testnumber
now i am going to ask you to do a few simple activities for me. researchers are
interested in how performance on these activities relates to some of the other
factors i have asked you about in the interview. i will ask you to do these
activities: a hearing test, a breathing test, a test of hand strength, [a
walking test,] a balance test, and blood pressure, height, [weight,] and waist
measurements.
my primary concern is for your safety, so i will ask you if you feel it would be
safe for you to complete each activity. if you have any concerns about the
activity, please let me know and we will skip it.
please do not eat, drink, smoke, or brush your teeth while we are conducting the
measurements. i will also be asking you to remove bulky clothing and to take off
your shoes during the measurements.
iwer: enter 1 to continue.
.................................................................................
8915 1. continue
11997 blank. inap (inapplicable); partial interview
构造变量
assign: i802_pmconsent := empty:{previous ask} seci.i802_pmconsent
if seci.pmconsent_result = suppressed then
assign: i802_pmconsent := yes:{previous ask} seci.i600_pmconsentintro
if seci.i691_pmconsentcomplete = 1 then
{previous ask} seci.i600_pmconsentintro
if not(seci.i691_pmconsentcomplete = 1) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i802 physical measures consent
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.i802_pmconsent
did r sign the physical measures consent form?
.................................................................................
8323 1. yes
588 5. no
12001 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i600_pmconsentintro
if seci.i802_pmconsent = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i803 list of measures r is asked to complete
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.i803_eligible
this respondent is eligible for these measurements unless noted otherwise:
blood pressure
hearing test
breathing
hand strength
balance tests (with [30/60] second full-tandem)
walking test: eligible if 65 or older
height
weight: eligible if weight is under 300 pounds
waist
saliva: eligible if saliva invalid previous wave or no saliva collection
previous wave
blood spot assays
on the front cover of the walking-height-weight-waist-administration booklet,
mark whether the respondent is eligible to complete the walking test and weight
measurement.
the booklet may then be set aside until needed during the walking speed test.
.................................................................................
8321 1. continue
12591 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.blood_pressure.i602_bp_demo
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i662 bp screening question, left arm
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.blood_pressure.i662_bp_rash_l
blood pressure
do you have a rash, a cast, edema (swelling) in the arm, open sores or wounds,
or a significant bruise where the blood pressure cuff will be in contact on your
left arm?
.................................................................................
274 1. yes
8046 5. no
12592 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.blood_pressure.i662_bp_rash_l
if seci.blood_pressure.i662_bp_rash_l = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i663 bp screening question, right arm
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.blood_pressure.i663_bp_rash_r
blood pressure
do you have a rash, a cast, edema (swelling) in the arm, open sores or wounds,
or a significant bruise where the blood pressure cuff will be in contact on your
right arm?
.................................................................................
34 1. yes
240 5. no
20638 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.blood_pressure.i662_bp_rash_l
if (seci.blood_pressure.i662_bp_rash_l = no) or
(seci.blood_pressure.i663_bp_rash_r = no) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i961 r understanding of bp procedure & safety
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.blood_pressure.i961_bp_dir
blood pressure
do you understand these directions and feel it would be safe for you to do this
measurement?
.................................................................................
8182 1. yes
104 5. no
12626 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.blood_pressure.i603_bp_instruct
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i857 bloodpressure time
section: i level: respondent type: character width: 8 decimals: 0
ref: seci.blood_pressure.bptable.bp1.i857_bloodpressure1_time
blood pressure
iwer: instruct the r to remain still.
iwer: press the start/stop button and record measurements
first reading - time of reading
iwer: enter hour, colon, minutes, and either 'am' or 'pm'. e.g., for a time of
1:23pm, enter '1' followed by ':' followed by '23' followed by 'pm'.
iwer: please check to make sure entry displays correctly before proceeding.
user note: time of day is presented in military time.
.................................................................................
8156 00000000-23:53:00. actual value
15 99999998. dk (don't know); na (not ascertained)
12 99999999. rf (refused)
12729 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.blood_pressure.bptable.bp1.i857_bloodpressure1_time
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i859 bloodpressure 1 systolic
section: i level: respondent type: numeric width: 3 decimals: 0
ref: seci.blood_pressure.bptable.bp1.i859_bloodpressure1_systolic
blood pressure
first reading systolic
iwer: enter [993] if r tried but was unable to do it or if an unresolvable
equipment problem occurs.
iwer: enter [999] if r chose not to do it.
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8112 0 229 128.87 20.80 12729
-----------------------------------------------------------------
43 993. r was unable to do it
17 998. dk (don't know); na (not ascertained)
11 999. r chose not to do it
构造变量
{previous ask} seci.blood_pressure.bptable.bp1.i859_bloodpressure1_systolic
if (seci.blood_pressure.bptable.bp1.i859_bloodpressure1_systolic <> 993) and
(seci.blood_pressure.bptable.bp1.i859_bloodpressure1_systolic <> 999) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i860 bloodpressure 1 diastolic
section: i level: respondent type: numeric width: 3 decimals: 0
ref: seci.blood_pressure.bptable.bp1.i860_bloodpressure1_diastolic
blood pressure
first reading - diastolic
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8112 0 150 79.29 12.39 12775
-----------------------------------------------------------------
17 998. dk (don't know); na (not ascertained)
8 999. rf (refused)
构造变量
{previous ask} seci.blood_pressure.bptable.bp1.i860_bloodpressure1_diastolic
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i861 bloodpressure 1 pulse
section: i level: respondent type: numeric width: 3 decimals: 0
ref: seci.blood_pressure.bptable.bp1.i861_bloodpressure1_pulse
blood pressure
first reading - pulse
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8106 0 156 71.00 11.95 12775
-----------------------------------------------------------------
2 621-993. out of range
22 998. dk (don't know); na (not ascertained)
7 999. rf (refused)
构造变量
{previous ask} seci.blood_pressure.bptable.bp2.i604_bp_timer_2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i862 blood pressure 2 time
section: i level: respondent type: character width: 8 decimals: 0
ref: seci.blood_pressure.bptable.bp2.i862_bloodpressure2_time
blood pressure
ensure that you've allowed 45 seconds to elapse since first measurement.
second reading - time of reading
iwer: enter hour, colon, minutes, and either 'am' or 'pm'. e.g., for a time of
1:23pm, enter '1' followed by ':' followed by '23' followed by 'pm'.
iwer: please check to make sure entry displays correctly before proceeding.
user note: time of day is presented in military time.
.................................................................................
8103 00000000-23:40:00. actual value
17 99999998. dk (don't know); na (not ascertained)
17 99999999. rf (refused)
12775 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.blood_pressure.bptable.bp2.i862_bloodpressure2_time
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i864 bloodpressure 2 systolic
section: i level: respondent type: numeric width: 3 decimals: 0
ref: seci.blood_pressure.bptable.bp2.i864_bloodpressure2_systolic
blood pressure
second reading - systolic
iwer: enter [993] if r tried but was unable to do it or if an unresolvable
equipment problem occurs.
iwer: enter [999] if r chose not to do it.
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8091 0 227 127.54 20.22 12775
-----------------------------------------------------------------
9 993. r tried but was unable to do it
20 998. dk (don't know); na (not ascertained)
17 999. r chose not to do it
构造变量
{previous ask} seci.blood_pressure.bptable.bp2.i864_bloodpressure2_systolic
if (seci.blood_pressure.bptable.bp2.i864_bloodpressure2_systolic <> 993) and
(seci.blood_pressure.bptable.bp2.i864_bloodpressure2_systolic <> 999) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i865 bloodpressure 2 diastolic
section: i level: respondent type: numeric width: 3 decimals: 0
ref: seci.blood_pressure.bptable.bp2.i865_bloodpressure2_diastolic
blood pressure
second reading - diastolic
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8091 0 766 78.29 14.30 12784
-----------------------------------------------------------------
20 998. dk (don't know); na (not ascertained)
17 999. rf (refused)
构造变量
{previous ask} seci.blood_pressure.bptable.bp2.i865_bloodpressure2_diastolic
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i866 bloodpressure 2 pulse
section: i level: respondent type: numeric width: 3 decimals: 0
ref: seci.blood_pressure.bptable.bp2.i866_bloodpressure2_pulse
blood pressure
second reading - pulse
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8089 0 130 70.78 11.93 12784
-----------------------------------------------------------------
1 781. out of range
22 998. dk (don't know); na (not ascertained)
16 999. rf (refused)
构造变量
{previous ask} seci.blood_pressure.bptable.bp3.i605_bp_timer_3
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i867 bloodpressure 3 time
section: i level: respondent type: character width: 8 decimals: 0
ref: seci.blood_pressure.bptable.bp3.i867_bloodpressure3_time
blood pressure
third reading - time of reading
iwer: enter hour, colon, minutes, and either 'am' or 'pm'. e.g., for a time of
1:23pm, enter '1' followed by ':' followed by '23' followed by 'pm'.
iwer: please check to make sure entry displays correctly before proceeding.
user note: time of day is presented in military time.
.................................................................................
8061 00000000-23:47:00. actual value
20 99999998. dk (don't know); na (not ascertained)
26 99999999. rf (refused)
12805 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.blood_pressure.bptable.bp3.i867_bloodpressure3_time
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i869 bloodpressure 3 systolic
section: i level: respondent type: numeric width: 3 decimals: 0
ref: seci.blood_pressure.bptable.bp3.i869_bloodpressure3_systolic
blood pressure
third reading - systolic
iwer: enter [993] if r tried but was unable to do it or if an unresolvable
equipment problem occurs.
iwer: enter [999] if r chose not to do it.
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8040 0 216 126.54 19.68 12805
-----------------------------------------------------------------
10 993. r tried but was unable to do it
24 998. dk (don't know); na (not ascertained)
33 999. r chose not to do it
构造变量
{previous ask} seci.blood_pressure.bptable.bp3.i869_bloodpressure3_systolic
if (seci.blood_pressure.bptable.bp3.i869_bloodpressure3_systolic <> 993) and
(seci.blood_pressure.bptable.bp3.i869_bloodpressure3_systolic <> 999) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i870 bloodpressure 3 diastolic
section: i level: respondent type: numeric width: 3 decimals: 0
ref: seci.blood_pressure.bptable.bp3.i870_bloodpressure3_diastolic
blood pressure
third reading - diastolic
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8039 0 140 77.64 11.87 12823
-----------------------------------------------------------------
1 791. out of range
24 998. dk (don't know); na (not ascertained)
25 999. rf (refused)
构造变量
{previous ask} seci.blood_pressure.bptable.bp3.i870_bloodpressure3_diastolic
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i871 bloodpressure 3 pulse
section: i level: respondent type: numeric width: 3 decimals: 0
ref: seci.blood_pressure.bptable.bp3.i871_bloodpressure3_pulse
blood pressure
third reading - pulse
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8036 0 139 70.80 11.96 12823
-----------------------------------------------------------------
1 722. out of range
27 998. dk (don't know); na (not ascertained)
25 999. rf (refused)
构造变量
{previous ask} seci.blood_pressure.i603_bp_instruct
if seci.blood_pressure.bptable.i665_bp_emergency <> empty and
(seci.blood_pressure.bptable.i665_bp_emergency <> 0) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i668 severely high blood pressure iw action
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.blood_pressure.bptable.i668_bp_hypcrs
blood pressure
this respondent's blood pressure is severely high. please read the following to
determine whether the respondent feels comfortable continuing the interview.
according to our measurements, your blood pressure today is severely high.
if you are not feeling well, a doctor might recommend that you seek medical care
to evaluate your high blood pressure.
do you feel well enough to continue the interview or would you like to stop and
continue at a later date?
iwer: even if the r prefers to stop the interview, you must answer this
question. you will be prompted to provide the r's results and complete the bp
observations before suspending.
.................................................................................
23 1. r feels well enough to continue
1 5. r prefers to stop the interview
20888 blank. inap (inapplicable); partial interview
构造变量
if ((((((((((bptable.bp1.i857_bloodpressure1_time <> nonresponse and
bptable.bp1.i857_bloodpressure1_time <> empty) and
bptable.bp1.i859_bloodpressure1_systolic <> nonresponse) and
(bptable.bp1.i859_bloodpressure1_systolic <> 993)) and
(bptable.bp1.i859_bloodpressure1_systolic <> 999)) and
bptable.bp1.i859_bloodpressure1_systolic <> empty) and
bptable.bp1.i860_bloodpressure1_diastolic <> nonresponse) and
bptable.bp1.i860_bloodpressure1_diastolic <> empty) and
bptable.bp1.i861_bloodpressure1_pulse <> nonresponse) and
bptable.bp1.i861_bloodpressure1_pulse <> empty) or
(((((((((bptable.bp2.i862_bloodpressure2_time <> nonresponse and
bptable.bp2.i862_bloodpressure2_time <> empty) and
bptable.bp2.i864_bloodpressure2_systolic <> nonresponse) and
(bptable.bp2.i864_bloodpressure2_systolic <> 993)) and
(bptable.bp2.i864_bloodpressure2_systolic <> 999)) and
bptable.bp2.i864_bloodpressure2_systolic <> empty) and
bptable.bp2.i865_bloodpressure2_diastolic <> nonresponse) and
bptable.bp2.i865_bloodpressure2_diastolic <> empty) and
bptable.bp2.i866_bloodpressure2_pulse <> nonresponse) and
bptable.bp2.i866_bloodpressure2_pulse <> empty)) or
(((((((((bptable.bp3.i867_bloodpressure3_time <> nonresponse and
bptable.bp3.i867_bloodpressure3_time <> empty) and
bptable.bp3.i869_bloodpressure3_systolic <> nonresponse) and
(bptable.bp3.i869_bloodpressure3_systolic <> 993)) and
(bptable.bp3.i869_bloodpressure3_systolic <> 999)) and
bptable.bp3.i869_bloodpressure3_systolic <> empty) and
bptable.bp3.i870_bloodpressure3_diastolic <> nonresponse) and
bptable.bp3.i870_bloodpressure3_diastolic <> empty) and
bptable.bp3.i871_bloodpressure3_pulse <> nonresponse) and
bptable.bp3.i871_bloodpressure3_pulse <> empty) then assign:
i854_bloodpressurecomplete := yes
elseif ((bptable.bp1.i859_bloodpressure1_systolic = 993) or
(bptable.bp1.i859_bloodpressure1_systolic = 999)) and
((((((((bptable.bp1.i860_bloodpressure1_diastolic = dontknow) or
(bptable.bp1.i860_bloodpressure1_diastolic = refusal)) or
bptable.bp1.i860_bloodpressure1_diastolic = empty) or
(bptable.bp1.i861_bloodpressure1_pulse = dontknow)) or
(bptable.bp1.i861_bloodpressure1_pulse = refusal)) or
bptable.bp1.i861_bloodpressure1_pulse = empty) and
(((((((((((bptable.bp2.i864_bloodpressure2_systolic = dontknow) or
(bptable.bp2.i864_bloodpressure2_systolic = refusal)) or
(bptable.bp2.i864_bloodpressure2_systolic = 993)) or
(bptable.bp2.i864_bloodpressure2_systolic = 999)) or
bptable.bp2.i864_bloodpressure2_systolic = empty) or
(bptable.bp2.i865_bloodpressure2_diastolic = dontknow)) or
(bptable.bp2.i865_bloodpressure2_diastolic = refusal)) or
bptable.bp1.i860_bloodpressure1_diastolic = empty) or
(bptable.bp2.i866_bloodpressure2_pulse = dontknow)) or
(bptable.bp2.i866_bloodpressure2_pulse = refusal)) or
bptable.bp2.i866_bloodpressure2_pulse = empty)) and
(((((((((((bptable.bp3.i869_bloodpressure3_systolic = dontknow) or
(bptable.bp3.i869_bloodpressure3_systolic = refusal)) or
(bptable.bp3.i869_bloodpressure3_systolic = 993)) or
(bptable.bp3.i869_bloodpressure3_systolic = 999)) or
bptable.bp3.i869_bloodpressure3_systolic = empty) or
(bptable.bp3.i870_bloodpressure3_diastolic = dontknow)) or
(bptable.bp3.i870_bloodpressure3_diastolic = refusal)) or
bptable.bp3.i870_bloodpressure3_diastolic = empty) or
(bptable.bp3.i871_bloodpressure3_pulse = dontknow)) or
(bptable.bp3.i871_bloodpressure3_pulse = refusal)) or
bptable.bp3.i871_bloodpressure3_pulse = empty)) then assign:
i854_bloodpressurecomplete := no
else then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i854 blood pressure complete
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.blood_pressure.i854_bloodpressurecomplete
blood pressure
did r complete at least one blood pressure measurement?
.................................................................................
8113 1. yes
69 5. no
12730 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.blood_pressure.i603_bp_instruct
if seci.blood_pressure.i854_bloodpressurecomplete = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i872 bloodpressure arm
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.blood_pressure.i872_bloodpressurearm
blood pressure
which arm was used to conduct the measurements?
.................................................................................
7845 1. left arm
265 2. right arm
2 8. dk (don't know); na (not ascertained)
9. rf (refused)
12800 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.blood_pressure.i872_bloodpressurearm
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i874 bloodpressure position
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.blood_pressure.i874_bloodpressureposition
blood pressure
what was r's position for this test?
.................................................................................
98 1. standing
8002 2. sitting
11 3. lying down
1 8. dk (don't know); na (not ascertained)
9. rf (refused)
12800 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.blood_pressure.i662_bp_rash_l
if (seci.blood_pressure.bptable.i665_bp_emergency = 0) or
(seci.blood_pressure.bptable.i665_bp_emergency = empty and
(seci.blood_pressure.bptable.i668_bp_hypcrs <> stop)) then
if (((seci.blood_pressure.i662_bp_rash_l <> no) and
(seci.blood_pressure.i663_bp_rash_r <> no)) or (seci.blood_pressure.i961_bp_dir
<> yes)) or (seci.blood_pressure.i854_bloodpressurecomplete <> yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i855m1 blood pressure not complete-1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.blood_pressure.i855_bpwhynotcomplete[1]
blood pressure
why didn't r complete the blood pressure measurement?
iwer: enter all that apply.
.................................................................................
19 1. r felt it would not be safe
5 2. iwer felt it would not be safe
50 3. r refused or was not willing to complete the test
43 4. r tried but was unable to complete test
2 5. r did not understand the instructions
22 6. r had a rash, a cast, edema, open sores or wounds, or
significant bruise where the blood cuff would contact r's
arm
3 7. no suitable space
62 8. problem with equipment or supplies
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20705 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.blood_pressure.i662_bp_rash_l
if (seci.blood_pressure.bptable.i665_bp_emergency = 0) or
(seci.blood_pressure.bptable.i665_bp_emergency = empty and
(seci.blood_pressure.bptable.i668_bp_hypcrs <> stop)) then
if (((seci.blood_pressure.i662_bp_rash_l <> no) and
(seci.blood_pressure.i663_bp_rash_r <> no)) or (seci.blood_pressure.i961_bp_dir
<> yes)) or (seci.blood_pressure.i854_bloodpressurecomplete <> yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i855m2 blood pressure not complete-2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.blood_pressure.i855_bpwhynotcomplete[2]
blood pressure
why didn't r complete the blood pressure measurement?
iwer: enter all that apply.
.................................................................................
1 1. r felt it would not be safe
3 2. iwer felt it would not be safe
1 3. r refused or was not willing to complete the test
4 4. r tried but was unable to complete test
5. r did not understand the instructions
2 6. r had a rash, a cast, edema, open sores or wounds, or
significant bruise where the blood cuff would contact r's
arm
7. no suitable space
31 8. problem with equipment or supplies
3 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20867 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.blood_pressure.i662_bp_rash_l
if (seci.blood_pressure.bptable.i665_bp_emergency = 0) or
(seci.blood_pressure.bptable.i665_bp_emergency = empty and
(seci.blood_pressure.bptable.i668_bp_hypcrs <> stop)) then
if (((seci.blood_pressure.i662_bp_rash_l <> no) and
(seci.blood_pressure.i663_bp_rash_r <> no)) or (seci.blood_pressure.i961_bp_dir
<> yes)) or (seci.blood_pressure.i854_bloodpressurecomplete <> yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i855m3 blood pressure not complete-3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.blood_pressure.i855_bpwhynotcomplete[3]
blood pressure
why didn't r complete the blood pressure measurement?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
6. r had a rash, a cast, edema, open sores or wounds, or
significant bruise where the blood cuff would contact r's
arm
1 7. no suitable space
1 8. problem with equipment or supplies
3 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20907 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.blood_pressure.i662_bp_rash_l
if (seci.blood_pressure.bptable.i665_bp_emergency = 0) or
(seci.blood_pressure.bptable.i665_bp_emergency = empty and
(seci.blood_pressure.bptable.i668_bp_hypcrs <> stop)) then
if (((seci.blood_pressure.i662_bp_rash_l <> no) and
(seci.blood_pressure.i663_bp_rash_r <> no)) or (seci.blood_pressure.i961_bp_dir
<> yes)) or (seci.blood_pressure.i854_bloodpressurecomplete <> yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i855m4 blood pressure not complete-4
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.blood_pressure.i855_bpwhynotcomplete[4]
blood pressure
why didn't r complete the blood pressure measurement?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
6. r had a rash, a cast, edema, open sores or wounds, or
significant bruise where the blood cuff would contact r's
arm
7. no suitable space
8. problem with equipment or supplies
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20911 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.blood_pressure.i662_bp_rash_l
if (seci.blood_pressure.bptable.i665_bp_emergency = 0) or
(seci.blood_pressure.bptable.i665_bp_emergency = empty and
(seci.blood_pressure.bptable.i668_bp_hypcrs <> stop)) then
if (((seci.blood_pressure.i662_bp_rash_l <> no) and
(seci.blood_pressure.i663_bp_rash_r <> no)) or (seci.blood_pressure.i961_bp_dir
<> yes)) or (seci.blood_pressure.i854_bloodpressurecomplete <> yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i855m5 blood pressure not complete-5
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.blood_pressure.i855_bpwhynotcomplete[5]
blood pressure
why didn't r complete the blood pressure measurement?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
6. r had a rash, a cast, edema, open sores or wounds, or
significant bruise where the blood cuff would contact r's
arm
7. no suitable space
8. problem with equipment or supplies
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.blood_pressure.i662_bp_rash_l
if seci.blood_pressure.bptable.i668_bp_hypcrs = stop then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i669 suspend interview due to blood pressure
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.blood_pressure.i669_bp_hypcrs_susp
blood pressure
please suspend the interview at this time.
iwer: enter [1] to continue.
.................................................................................
1 1. continue
20911 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hearing.i671_hrdemo
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i672 have cochlear implant
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.hearing.i672_hrimplant
do you have a cochlear implant?
.................................................................................
15 1. yes
8268 5. no
12629 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hearing.i672_hrimplant
if not (seci.hearing.i672_hrimplant = yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i673 have ear infection
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.hearing.i673_hrinfection
do you have an ear infection in either ear at the moment?
.................................................................................
76 1. yes
8192 5. no
12644 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hearing.i673_hrinfection
if not (seci.hearing.i673_hrinfection = yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i946 currently wearing hearing aid
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.hearing.i946_hrhraid_ask
if necessary: are you currently wearing a hearing aid in one or both ears?
.................................................................................
421 1. yes
7771 5. no
12720 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hearing.i946_hrhraid_ask
if seci.hearing.i946_hrhraid_ask = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i674 willing to remove aid for hearing test
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.hearing.i674_hrhraid
would you be willing to remove your hearing aid(s) for the purposes of this
test?
respondent should not remove hearing aid(s) until directed in a few moments.
.................................................................................
413 1. yes
8 5. no
20491 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hearing.i946_hrhraid_ask
if not (seci.hearing.i946_hrhraid_ask = yes) or (seci.hearing.i674_hrhraid =
yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i675 r felt safe to do hearing test
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.hearing.i675_hrdir
do you understand these directions and feel it would be safe for you to do this
measurement?
.................................................................................
8121 1. yes
63 5. no
12728 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hearing.i677_hrlinstruct2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i678 hearing test 1 - left ear
section: i level: respondent type: numeric width: 3 decimals: 0
ref: seci.hearing.i678_hrltest1
hearing test
left ear - test 1, 1000 hz
enter the number of times the r raised their finger during test 1 (1000 hz)
iwer: enter [993] if you were unable to complete this test
iwer: enter [999] if r chose not to do it
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8107 0 6 2.22 0.82 12791
-----------------------------------------------------------------
9 993. unable to complete this test
5 999. r chose not to do it
构造变量
{previous ask} seci.hearing.i678_hrltest1
if (seci.hearing.i678_hrltest1 = response) and not ((seci.hearing.i678_hrltest1
= 993) or (seci.hearing.i678_hrltest1 = 999)) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i679 hearing test 2 - left ear
section: i level: respondent type: numeric width: 3 decimals: 0
ref: seci.hearing.i679_hrltest2
hearing test
left ear - test 2, 3000 hz
enter the number of times the r raised their finger during test 2 (3000 hz)
iwer: enter [993] if you were unable to complete this test
iwer: enter [999] if r chose not to do it
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8107 0 6 2.37 0.84 12805
-----------------------------------------------------------------
993. unable to complete this test
999. r chose not to do it
构造变量
{previous ask} seci.hearing.i948_hrrinstruct1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i680 hearing test 1 - right ear
section: i level: respondent type: numeric width: 3 decimals: 0
ref: seci.hearing.i680_hrrtest1
hearing test
right ear - test 1, 1000 hz
enter the number of times the r raised their finger during test 1 (1000 hz)
iwer: enter [993] if you were unable to complete this test
iwer: enter [999] if r chose not to do it
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8100 0 6 2.29 0.78 12805
-----------------------------------------------------------------
2 993. unable to complete this test
5 999. r chose not to do it
构造变量
{previous ask} seci.hearing.i678_hrltest1
if (seci.hearing.i680_hrrtest1 = response) and not ((seci.hearing.i680_hrrtest1
= 993) or (seci.hearing.i680_hrrtest1 = 999)) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i681 hearing test 2 - right ear
section: i level: respondent type: numeric width: 3 decimals: 0
ref: seci.hearing.i681_hrrtest2
hearing test
right ear - test 2, 3000 hz
1) enter the number of times the respondent raised their finger during test 2
(3000 hz)
2) remove the disposable ear cup
iwer: enter [993] if you were unable to complete this test
iwer: enter [999] if r chose not to do it
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8100 0 6 2.42 0.82 12812
-----------------------------------------------------------------
993. unable to complete this test
999. r chose not to do it
构造变量
assign: i682_hearingtest := no:{previous ask} seci.hearing.i678_hrltest1
if not(((((seci.hearing.i678_hrltest1 = response) and
((seci.hearing.i678_hrltest1 >= 0) and (seci.hearing.i678_hrltest1 <= 3))) or
((seci.hearing.i679_hrltest2 = response) and ((seci.hearing.i679_hrltest2 >= 0)
and (seci.hearing.i679_hrltest2 <= 3)))) or ((seci.hearing.i680_hrrtest1 =
response) and ((seci.hearing.i680_hrrtest1 >= 0) and
(seci.hearing.i680_hrrtest1 <= 3)))) or ((seci.hearing.i681_hrrtest2 =
response) and ((seci.hearing.i681_hrrtest2 >= 0) and
(seci.hearing.i681_hrrtest2 <= 3)))) then
if ((((seci.hearing.i678_hrltest1 = empty or (seci.hearing.i678_hrltest1 =
993)) or (seci.hearing.i678_hrltest1 = 999)) and ((seci.hearing.i679_hrltest2 =
empty or (seci.hearing.i679_hrltest2 = 993)) or (seci.hearing.i679_hrltest2 =
999))) and ((seci.hearing.i680_hrrtest1 = empty or (seci.hearing.i680_hrrtest1
= 993)) or (seci.hearing.i680_hrrtest1 = 999))) and
((seci.hearing.i681_hrrtest2 = empty or (seci.hearing.i681_hrrtest2 = 993)) or
(seci.hearing.i681_hrrtest2 = 999)) then
assign: i682_hearingtest := yes:{previous ask} seci.hearing.i678_hrltest1
if ((((seci.hearing.i678_hrltest1 = response) and ((seci.hearing.i678_hrltest1
>= 0) and (seci.hearing.i678_hrltest1 <= 3))) or ((seci.hearing.i679_hrltest2 =
response) and ((seci.hearing.i679_hrltest2 >= 0) and
(seci.hearing.i679_hrltest2 <= 3)))) or ((seci.hearing.i680_hrrtest1 =
response) and ((seci.hearing.i680_hrrtest1 >= 0) and
(seci.hearing.i680_hrrtest1 <= 3)))) or ((seci.hearing.i681_hrrtest2 =
response) and ((seci.hearing.i681_hrrtest2 >= 0) and
(seci.hearing.i681_hrrtest2 <= 3))) then
{previous ask} seci.hearing.i678_hrltest1
if not(((((seci.hearing.i678_hrltest1 = response) and
((seci.hearing.i678_hrltest1 >= 0) and (seci.hearing.i678_hrltest1 <= 3))) or
((seci.hearing.i679_hrltest2 = response) and ((seci.hearing.i679_hrltest2 >= 0)
and (seci.hearing.i679_hrltest2 <= 3)))) or ((seci.hearing.i680_hrrtest1 =
response) and ((seci.hearing.i680_hrrtest1 >= 0) and
(seci.hearing.i680_hrrtest1 <= 3)))) or ((seci.hearing.i681_hrrtest2 =
response) and ((seci.hearing.i681_hrrtest2 >= 0) and
(seci.hearing.i681_hrrtest2 <= 3)))) then
if not(((((seci.hearing.i678_hrltest1 = empty or (seci.hearing.i678_hrltest1 =
993)) or (seci.hearing.i678_hrltest1 = 999)) and ((seci.hearing.i679_hrltest2 =
empty or (seci.hearing.i679_hrltest2 = 993)) or (seci.hearing.i679_hrltest2 =
999))) and ((seci.hearing.i680_hrrtest1 = empty or (seci.hearing.i680_hrrtest1
= 993)) or (seci.hearing.i680_hrrtest1 = 999))) and
((seci.hearing.i681_hrrtest2 = empty or (seci.hearing.i681_hrrtest2 = 993)) or
(seci.hearing.i681_hrrtest2 = 999))) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i682 completed at least one hearing test
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.hearing.i682_hearingtest
hearing test
did r complete at least one of the four hearing tests?
.................................................................................
8107 1. yes
14 5. no
8. dk (don't know); na (not ascertained)
9. rf (refused)
12791 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hearing.i678_hrltest1
if seci.hearing.i682_hearingtest = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i683m1 hearing test problems - 1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.hearing.i683_hrproblems[1]
hearing test
which of the following occurred during the hearing test?
iwer: choose all that apply
.................................................................................
6767 1. none
409 2. background noise interfered with the hearing test
5 3. problem with equipment or supplies
32 4. had to restart the test
662 5. respondent removed obstructions (glasses, earrings, etc.)
85 6. respondent removed hearing aid
33 7. respondent took action to reduce background noise (turned
down television, asked hh members for quiet, etc.)
71 8. respondent raised their finger more than three times for a
single test
43 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
12805 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hearing.i678_hrltest1
if seci.hearing.i682_hearingtest = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i683m2 hearing test problems - 2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.hearing.i683_hrproblems[2]
hearing test
which of the following occurred during the hearing test?
iwer: choose all that apply
.................................................................................
1. none
26 2. background noise interfered with the hearing test
3 3. problem with equipment or supplies
15 4. had to restart the test
40 5. respondent removed obstructions (glasses, earrings, etc.)
51 6. respondent removed hearing aid
27 7. respondent took action to reduce background noise (turned
down television, asked hh members for quiet, etc.)
37 8. respondent raised their finger more than three times for a
single test
13 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20700 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hearing.i678_hrltest1
if seci.hearing.i682_hearingtest = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i683m3 hearing test problems - 3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.hearing.i683_hrproblems[3]
hearing test
which of the following occurred during the hearing test?
iwer: choose all that apply
.................................................................................
1. none
3 2. background noise interfered with the hearing test
3. problem with equipment or supplies
4. had to restart the test
4 5. respondent removed obstructions (glasses, earrings, etc.)
2 6. respondent removed hearing aid
3 7. respondent took action to reduce background noise (turned
down television, asked hh members for quiet, etc.)
2 8. respondent raised their finger more than three times for a
single test
4 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20894 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hearing.i678_hrltest1
if seci.hearing.i682_hearingtest = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i683m4 hearing test problems - 4
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.hearing.i683_hrproblems[4]
hearing test
which of the following occurred during the hearing test?
iwer: choose all that apply
.................................................................................
1. none
2. background noise interfered with the hearing test
3. problem with equipment or supplies
4. had to restart the test
5. respondent removed obstructions (glasses, earrings, etc.)
6. respondent removed hearing aid
2 7. respondent took action to reduce background noise (turned
down television, asked hh members for quiet, etc.)
8. respondent raised their finger more than three times for a
single test
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20910 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hearing.i678_hrltest1
if seci.hearing.i682_hearingtest = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i683m5 hearing test problems - 5
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.hearing.i683_hrproblems[5]
hearing test
which of the following occurred during the hearing test?
iwer: choose all that apply
.................................................................................
1. none
2. background noise interfered with the hearing test
3. problem with equipment or supplies
4. had to restart the test
5. respondent removed obstructions (glasses, earrings, etc.)
6. respondent removed hearing aid
7. respondent took action to reduce background noise (turned
down television, asked hh members for quiet, etc.)
8. respondent raised their finger more than three times for a
single test
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hearing.i672_hrimplant
if seci.hearing.i683_hrproblems = empty then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i685m1 why hearing test not complete - 1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.hearing.i685_hrwhynocomplete[1]
hearing test
why didn't r complete the hearing tests?
iwer: choose all that apply
.................................................................................
30 1. r felt it would not be safe
13 2. iwer felt it would not be safe
48 3. r refused or was not willing to complete the test
3 4. r tried but was unable to complete test
1 5. r did not understand the instructions
1 6. background noise prevented execution of the hearing test
11 7. problem with equipment or supplies
2 8. r unwilling to remove glasses, earrings, headwear, etc.
63 9. ear infection; other health reason
4 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20736 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hearing.i672_hrimplant
if seci.hearing.i683_hrproblems = empty then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i685m2 why hearing test not complete - 2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.hearing.i685_hrwhynocomplete[2]
hearing test
why didn't r complete the hearing tests?
iwer: choose all that apply
.................................................................................
3 1. r felt it would not be safe
3 2. iwer felt it would not be safe
3 3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
6. background noise prevented execution of the hearing test
7. problem with equipment or supplies
1 8. r unwilling to remove glasses, earrings, headwear, etc.
3 9. ear infection; other health reason
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20899 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hearing.i672_hrimplant
if seci.hearing.i683_hrproblems = empty then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i685m3 why hearing test not complete - 3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.hearing.i685_hrwhynocomplete[3]
hearing test
why didn't r complete the hearing tests?
iwer: choose all that apply
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
6. background noise prevented execution of the hearing test
7. problem with equipment or supplies
8. r unwilling to remove glasses, earrings, headwear, etc.
3 9. ear infection; other health reason
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20908 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hearing.i672_hrimplant
if seci.hearing.i683_hrproblems = empty then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i685m4 why hearing test not complete - 4
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.hearing.i685_hrwhynocomplete[4]
hearing test
why didn't r complete the hearing tests?
iwer: choose all that apply
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
6. background noise prevented execution of the hearing test
7. problem with equipment or supplies
8. r unwilling to remove glasses, earrings, headwear, etc.
9. ear infection; other health reason
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.breathing.i607_br_demo
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i964 breathing test safety question
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.breathing.i964_br_dir
breathing test
do you understand these directions and feel it would be safe for you to do this
measurement?
.................................................................................
8159 1. yes
160 5. no
12593 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.breathing.brtable.br1.i608_br_instruct2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i807 puff test 1
section: i level: respondent type: numeric width: 3 decimals: 0
ref: seci.breathing.brtable.br1.i807_puff1
breathing test
first reading - record to the nearest 10 l/min
iwer: enter [30] if reading is less than 60.
iwer: enter [890] if reading is past last tick mark.
iwer: enter [993] if r tried but was unable to do it.
iwer: enter [999] if r chose not to do it.
user note: breathing test is measured in liters per min (l/min).
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8143 0 880 320.06 140.22 12753
-----------------------------------------------------------------
3 890. reading is past last tick mark
9 993. r tried but was unable to do it
998. dk (don't know); na (not ascertained)
4 999. r chose not to do it
构造变量
{previous ask} seci.breathing.brtable.br2.i609_br_instruct3
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i808 puff test 2
section: i level: respondent type: numeric width: 3 decimals: 0
ref: seci.breathing.brtable.br2.i808_puff2
breathing test
second reading - record to the nearest 10 l/min
iwer: enter [30] is reading is less than 60.
iwer: enter [890] is reading is past last tick mark.
iwer: enter [993] if r tried but was unable to do it.
iwer: enter [999] if r chose not to do it.
user note: breathing test is measured in liters per min (l/min).
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8133 0 880 348.85 142.48 12765
-----------------------------------------------------------------
890. reading is past last tick mark
4 993. r tried but was unable to do it
1 998. dk (don't know); na (not ascertained)
9 999. r chose not to do it
构造变量
{previous ask} seci.breathing.brtable.br3.i610_br_instruct4
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i809 puff test 3
section: i level: respondent type: numeric width: 3 decimals: 0
ref: seci.breathing.brtable.br3.i809_puff3
breathing test
third reading - record to the nearest 10 l/min
iwer: enter [30] is reading is less than 60.
iwer: enter [890] is reading is past last tick mark.
iwer: enter [993] if r tried but was unable to do it.
iwer: enter [999] if r chose not to do it.
user note: breathing test is measured in liters per min (l/min).
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8125 0 880 358.84 142.82 12770
-----------------------------------------------------------------
1 890. reading is past last tick mark
2 993. r tried but was unable to do it
3 998. dk (don't know); na (not ascertained)
11 999. r chose not to do it
构造变量
assign: i804_breathtest := xi804_breathtest:{previous ask}
seci.breathing.i804_breathtest
or{previous ask} seci.i845_
if seci.breathing.i964_br_dir = yes then
if not(seci.breathing.xi804_breathtest = empty) then
{previous ask} seci.breathing.i964_br_dir
if seci.breathing.i964_br_dir = yes then
if seci.breathing.xi804_breathtest = empty then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i804 breath complete at least one trial
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.breathing.i804_breathtest
breathing test
did r complete at least one trial of the breathing test?
.................................................................................
8147 1. yes
12 5. no
12753 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.breathing.i964_br_dir
if seci.breathing.i964_br_dir = yes then
if seci.breathing.i804_breathtest = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i810 r breathing test effort
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.breathing.i810_reffort
breathing test
how much effort did the r give to this test?
.................................................................................
7933 1. r gave full effort
122 2. r was prevented from giving full effort by illness, pain, or
other symptoms or discomforts
92 3. r did not appear to give full effort, but no obvious reason
for this
8. dk (don't know); na (not ascertained)
9. rf (refused)
12765 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.breathing.i810_reffort
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i811 breathing test r position
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.breathing.i811_rposition
breathing test
what was the r's position for this test?
.................................................................................
7816 1. standing
320 2. sitting
10 3. lying down
1 8. dk (don't know); na (not ascertained)
9. rf (refused)
12765 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.breathing.i964_br_dir
if (seci.breathing.i964_br_dir <> yes) or (seci.breathing.i804_breathtest <>
yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i805m1 breath test reason not complete -1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.breathing.i805_[1]
breathing test
why didn't r complete the breathing test?
iwer: enter all that apply.
.................................................................................
51 1. r felt it would not be safe
17 2. iwer felt it would not be safe
57 3. r refused or was not willing to complete the test
8 4. r tried but was unable to complete test
1 5. r did not understand the instructions
15 6. r could not participate due to health reasons
3 7. no suitable space
20 8. problem with equipment or supplies
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20740 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.breathing.i964_br_dir
if (seci.breathing.i964_br_dir <> yes) or (seci.breathing.i804_breathtest <>
yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i805m2 breath test reason not complete -2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.breathing.i805_[2]
breathing test
why didn't r complete the breathing test?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
11 2. iwer felt it would not be safe
4 3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
3 6. r could not participate due to health reasons
7. no suitable space
8. problem with equipment or supplies
3 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20891 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.breathing.i964_br_dir
if (seci.breathing.i964_br_dir <> yes) or (seci.breathing.i804_breathtest <>
yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i805m3 breath test reason not complete -3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.breathing.i805_[3]
breathing test
why didn't r complete the breathing test?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
1 3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
6. r could not participate due to health reasons
7. no suitable space
8. problem with equipment or supplies
3 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20908 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.breathing.i964_br_dir
if (seci.breathing.i964_br_dir <> yes) or (seci.breathing.i804_breathtest <>
yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i805m4 breath test reason not complete -4
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.breathing.i805_[4]
breathing test
why didn't r complete the breathing test?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
6. r could not participate due to health reasons
7. no suitable space
8. problem with equipment or supplies
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hand_strength.i611_hs_demo
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i966 injury, pain or surgery on hand(s)
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.hand_strength.i966_hspain
hand strength
before we begin, i'd like to make sure it is safe for you to do this
measurement. have you experienced any severe swelling, inflammation, pain, or
injury in one or both hands within the last month or had surgery on your hands
or wrists in the last 6 months?
.................................................................................
677 1. yes
7642 5. no
12593 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hand_strength.i966_hspain
if seci.hand_strength.i966_hspain = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i967 affected hand(s)
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.hand_strength.i967_hshand
hand strength
in which hand (have you experienced severe swelling, inflammation, pain or
injury in the last month or had surgery in the last six months)?
iwer: if the r has had surgery or experienced any swelling, inflammation, pain
or injury in either hand, do not conduct the measurement on that hand.
.................................................................................
225 1. both hands
198 2. left hand only
254 3. right hand only
20235 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hand_strength.i966_hspain
if ((seci.hand_strength.i966_hspain = no) or (seci.hand_strength.i967_hshand =
left)) or (seci.hand_strength.i967_hshand = right) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i968 hand-strength safety question
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.hand_strength.i968_hs_dir
hand strength
do you understand these directions and feel it would be safe for you to do this
measurement?
.................................................................................
7992 1. yes
102 5. no
12818 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hand_strength.i966_hspain
if seci.hand_strength.i968_hs_dir = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i815 grip dominant hand
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.hand_strength.i815_gripdominanthand
hand strength test
which is your dominant hand?
user note: grip strength is measured in kilograms.
.................................................................................
7092 1. right hand
771 2. left hand
129 3. both hands equally dominant
1 8. dk (don't know); na (not ascertained)
12919 blank. inap (inapplicable); partial interview
i816 left hand first
section: i level: respondent type: numeric width: 5 decimals: 1
ref: seci.hand_strength.i816_leftfirst
hand strength test
left hand, first measurement
left hand, first measurement:
right hand, first measurement:
left hand, second measurement:
right hand, second measurement:
iwer: enter the result to the nearest 0.5 kilogram.
iwer: enter 993 if r was unable to perform this measurement
iwer: enter 999 if r chose not to do it
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
7773 0 100 26.23 10.25 12919
-----------------------------------------------------------------
210 993. r tried but was unable to complete the test
2 998. dk (don't know); na (not ascertained)
8 999. r chose not to do it
i851 right hand first
section: i level: respondent type: numeric width: 5 decimals: 1
ref: seci.hand_strength.i851_rightfirst
hand strength test
iwer: right hand, first measurement.
left hand, first measurement: [left first]
right hand, first measurement:
left hand, second measurement:
right hand, second measurement:
iwer: enter the result to the nearest 0.5 kilogram.
iwer: enter 993 if r was unable to perform this measurement
iwer: enter 999 if r chose not to do it
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
7721 0 90 29.08 10.96 12919
-----------------------------------------------------------------
257 993. r tried but was unable to complete the test
3 998. dk (don't know); na (not ascertained)
12 999. r chose not to do it
i852 left hand second
section: i level: respondent type: numeric width: 5 decimals: 1
ref: seci.hand_strength.i852_leftsecond
hand strength test
iwer: left hand, second measurement.
left hand, first measurement: [left first]
right hand, first measurement: [right first]
left hand, second measurement:
right hand, second measurement:
iwer: enter the result to the nearest 0.5 kilogram.
iwer: enter 993 if r was unable to perform this measurement
iwer: enter 999 if r chose not to do it
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
7764 0 70.5 27.09 10.51 12919
-----------------------------------------------------------------
214 993. r tried but was unable to complete the test
2 998. dk (don't know); na (not ascertained)
13 999. r chose not to do it
i853 right hand second
section: i level: respondent type: numeric width: 5 decimals: 1
ref: seci.hand_strength.i853_rightsecond
hand strength test
iwer: right hand, second measurement.
left hand, first measurement: [left first]
right hand, first measurement: [right first]
left hand, second measurement: [left second]
right hand, second measurement:
iwer: enter the result to the nearest 0.5 kilogram.
iwer: enter 993 if r was unable to perform this measurement
iwer: enter 999 if r chose not to do it
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
7711 0 100 29.59 11.11 12919
-----------------------------------------------------------------
3 205-567. out of range
258 993. r tried but was unable to complete the test
3 998. dk (don't know); na (not ascertained)
18 999. r chose not to do it
构造变量
assign: i812_ := xi812_:{previous ask} seci.hand_strength.i812_
or{previous ask} seci.i845_
if seci.hand_strength.i968_hs_dir = yes then
if not(seci.hand_strength.xi812_ = empty) then
{previous ask} seci.hand_strength.i815_gripdominanthand
if seci.hand_strength.xi812_ = empty then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i812 hand strength complete at least one trial
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.hand_strength.i812_
hand strength test
did r complete at least one trial of the hand strength test?
.................................................................................
7972 1. yes
21 5. no
12919 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hand_strength.i815_gripdominanthand
if seci.hand_strength.i812_ = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i817 grip r effort
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.hand_strength.i817_gripreffort
hand strength test
how much effort did the r give to this test?
.................................................................................
7873 1. r gave full effort
78 2. r was prevented from giving full effort by illness, pain, or
other symptoms or discomforts
20 3. r did not appear to give full effort, but no obvious reason
for this
1 8. dk (don't know); na (not ascertained)
12940 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hand_strength.i817_gripreffort
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i818 hand strength test r position
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.hand_strength.i818_rposition
hand strength test
what was the r's position for this test?
.................................................................................
7542 1. standing
416 2. sitting
12 3. lying down
2 8. dk (don't know); na (not ascertained)
9. rf (refused)
12940 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hand_strength.i818_rposition
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i819 hand strength rest arm
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.hand_strength.i819_
hand strength test
did the r rest their arm on a support while performing this test?
.................................................................................
1245 1. both hands
51 2. left hand only
45 3. right hand only
6630 5. no
1 8. dk (don't know); na (not ascertained)
12940 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hand_strength.i966_hspain
if (seci.hand_strength.i968_hs_dir <> yes) or (seci.hand_strength.i812_ <> yes)
then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i813m1 hand strength test reason not complete -1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.hand_strength.i813_[1]
hand strength test
why didn't r complete the hand strength test?
iwer: enter all that apply.
.................................................................................
91 1. r felt it would not be safe
37 2. iwer felt it would not be safe
33 3. r refused or was not willing to complete the test
12 4. r tried but was unable to complete test
1 5. r did not understand the instructions
150 6. r had surgery, injury, swelling, etc. on both hands
3 7. no suitable space
15 8. problem with equipment or supplies
6 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20564 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hand_strength.i966_hspain
if (seci.hand_strength.i968_hs_dir <> yes) or (seci.hand_strength.i812_ <> yes)
then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i813m2 hand strength test reason not complete -2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.hand_strength.i813_[2]
hand strength test
why didn't r complete the hand strength test?
iwer: enter all that apply.
.................................................................................
5 1. r felt it would not be safe
30 2. iwer felt it would not be safe
3 3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
16 6. r had surgery, injury, swelling, etc. on both hands
7. no suitable space
8. problem with equipment or supplies
9 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20849 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hand_strength.i966_hspain
if (seci.hand_strength.i968_hs_dir <> yes) or (seci.hand_strength.i812_ <> yes)
then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i813m3 hand strength test reason not complete -3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.hand_strength.i813_[3]
hand strength test
why didn't r complete the hand strength test?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2 2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
2 4. r tried but was unable to complete test
5. r did not understand the instructions
6 6. r had surgery, injury, swelling, etc. on both hands
7. no suitable space
8. problem with equipment or supplies
2 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20900 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hand_strength.i966_hspain
if (seci.hand_strength.i968_hs_dir <> yes) or (seci.hand_strength.i812_ <> yes)
then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i813m4 hand strength test reason not complete -4
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.hand_strength.i813_[4]
hand strength test
why didn't r complete the hand strength test?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
2 6. r had surgery, injury, swelling, etc. on both hands
7. no suitable space
8. problem with equipment or supplies
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20910 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.hand_strength.i966_hspain
if (seci.hand_strength.i968_hs_dir <> yes) or (seci.hand_strength.i812_ <> yes)
then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i813m5 hand strength test reason not complete -5
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.hand_strength.i813_[5]
hand strength test
why didn't r complete the hand strength test?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
6. r had surgery, injury, swelling, etc. on both hands
7. no suitable space
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.st.i615_st_intro2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i970 semi-tandem screening question
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.balance.st.i970_stnoba
balance test: semi-tandem stand
before we begin, do you have any problems from recent surgery, injury or other
health conditions that might prevent you from standing up from a chair and
balancing?
.................................................................................
797 1. yes
7505 5. no
8. dk (don't know); na (not ascertained)
17 9. rf (refused)
12593 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.st.i970_stnoba
if seci.balance.st.i970_stnoba = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i616 r injury/discomfort discussion
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.balance.st.i616_stdisc
balance test: semi-tandem stand
discuss with him/her whether s/he should attempt each measurement given his/her
physical problems after describing each measurement. do not assume a respondent
is too physically limited to attempt a measurement without discussing it with
him/her.
would the respondent like to proceed with this balance measurement?
.................................................................................
347 1. yes
448 5. no
8. dk (don't know); na (not ascertained)
2 9. rf (refused)
20115 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.st.i970_stnoba
if (seci.balance.st.i970_stnoba = no) or (seci.balance.st.i616_stdisc = yes)
then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i971 semi-tandem safety question
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.balance.st.i971_st_dir
balance test: semi-tandem stand
do you understand these directions and feel it would be safe for you to do this
measurement?
.................................................................................
7708 1. yes
144 5. no
13060 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.st.i618_st_instruct2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i879 balance test semi-tandem hold full time
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.balance.st.i879_semitandemholdfulltime
balance test - semi-tandem stand
did r hold semi-tandem stand for full 10 seconds without stepping out of place
or grabbing hold of anything?
.................................................................................
7243 1. yes
465 5. no
13204 blank. inap (inapplicable); partial interview
构造变量
assign: i876_ststand := yes:{previous ask}
seci.balance.st.i879_semitandemholdfulltime
if seci.balance.st.i879_semitandemholdfulltime = yes then
or{previous ask} seci.i845_
if (seci.balance.st.i970_stnoba = no) or (seci.balance.st.i616_stdisc = yes)
then
if seci.balance.st.i971_st_dir = yes then
if seci.balance.st.i879_semitandemholdfulltime = yes then
{previous ask} seci.balance.st.i879_semitandemholdfulltime
if not(seci.balance.st.i879_semitandemholdfulltime = yes) then
if seci.balance.st.i879_semitandemholdfulltime = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i876 balance test - semi-tandem stand
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.balance.st.i876_ststand
balance test - semi-tandem stand
did r complete the semi-tandem stand?
.................................................................................
7653 1. yes
55 5. no
13204 blank. inap (inapplicable); partial interview
构造变量
assign: i880_semitandemtime := 10:{previous ask}
seci.balance.st.i879_semitandemholdfulltime
if seci.balance.st.i879_semitandemholdfulltime = yes then
or{previous ask} seci.i845_
if (seci.balance.st.i970_stnoba = no) or (seci.balance.st.i616_stdisc = yes)
then
if seci.balance.st.i971_st_dir = yes then
if seci.balance.st.i879_semitandemholdfulltime = yes then
{previous ask} seci.balance.st.i876_ststand
if seci.balance.st.i876_ststand = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i880 balance test semi-tandem time
section: i level: respondent type: numeric width: 5 decimals: 2
ref: seci.balance.st.i880_semitandemtime
balance test - semi-tandem stand
record time in seconds to two decimal places
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
7650 0 20 9.73 1.37 13259
-----------------------------------------------------------------
3 98. dk (don't know); na (not ascertained)
99. rf (refused)
构造变量
{previous ask} seci.balance.st.i879_semitandemholdfulltime
if (seci.balance.st.i879_semitandemholdfulltime = yes) or
(seci.balance.st.i876_ststand = yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i881 balance test semi-tandem compensatory
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.balance.st.i881_semitandemcompensatory
balance test - semi-tandem stand
did r use any compensatory movements of his/her trunk, arms or legs to steady
him/herself during semi-tandem stand?
.................................................................................
1393 1. yes
6260 5. no
8. dk (don't know); na (not ascertained)
13259 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.st.i970_stnoba
if ((seci.balance.st.i971_st_dir = no) or (seci.balance.st.i876_ststand = no))
or (seci.balance.st.i616_stdisc = no) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i877m1 balance semi-tandem reason not comp-1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.balance.st.i877_ststand_whynotcomplete[1]
balance test - semi-tandem stand
why didn't r complete the semi-tandem stand?
iwer: enter all that apply
.................................................................................
393 1. r felt it would not be safe
61 2. iwer felt it would not be safe
43 3. r refused or was not willing to complete the test
11 4. r tried but was unable to complete test
2 5. r did not understand the instructions
129 6. r had surgery, injury, or other health condition that
prevented r from standing
7 97. other (specify)
1 98. dk (don't know); na (not ascertained)
99. rf (refused)
20265 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.st.i970_stnoba
if ((seci.balance.st.i971_st_dir = no) or (seci.balance.st.i876_ststand = no))
or (seci.balance.st.i616_stdisc = no) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i877m2 balance semi-tandem reason not comp-2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.balance.st.i877_ststand_whynotcomplete[2]
balance test - semi-tandem stand
why didn't r complete the semi-tandem stand?
iwer: enter all that apply
.................................................................................
17 1. r felt it would not be safe
159 2. iwer felt it would not be safe
15 3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
51 6. r had surgery, injury, or other health condition that
prevented r from standing
10 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20660 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.st.i970_stnoba
if ((seci.balance.st.i971_st_dir = no) or (seci.balance.st.i876_ststand = no))
or (seci.balance.st.i616_stdisc = no) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i877m3 balance semi-tandem reason not comp-3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.balance.st.i877_ststand_whynotcomplete[3]
balance test - semi-tandem stand
why didn't r complete the semi-tandem stand?
iwer: enter all that apply
.................................................................................
2 1. r felt it would not be safe
5 2. iwer felt it would not be safe
6 3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
70 6. r had surgery, injury, or other health condition that
prevented r from standing
12 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20817 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.st.i970_stnoba
if ((seci.balance.st.i971_st_dir = no) or (seci.balance.st.i876_ststand = no))
or (seci.balance.st.i616_stdisc = no) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i877m4 balance semi-tandem reason not comp-4
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.balance.st.i877_ststand_whynotcomplete[4]
balance test - semi-tandem stand
why didn't r complete the semi-tandem stand?
iwer: enter all that apply
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
3 6. r had surgery, injury, or other health condition that
prevented r from standing
5 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20904 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.st.i970_stnoba
if ((seci.balance.st.i971_st_dir = no) or (seci.balance.st.i876_ststand = no))
or (seci.balance.st.i616_stdisc = no) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i877m5 balance semi-tandem reason not comp-5
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.balance.st.i877_ststand_whynotcomplete[5]
balance test - semi-tandem stand
why didn't r complete the semi-tandem stand?
iwer: enter all that apply
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
6. r had surgery, injury, or other health condition that
prevented r from standing
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.sbs.i620_sbs_intro
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i973 side-by-side safety question
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.balance.sbs.i973_sbs_dir
balance test: side-by-side stand
do you understand these directions and feel it would be safe for you to do this
measurement?
.................................................................................
730 1. yes
346 5. no
19836 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.sbs.i622_sbs_instruct2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i886 balance test s-b-s hold full time
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.balance.sbs.i886_sidebysideholdfulltime
balance test - side-by-side stand
did r hold side-by-side stand for full 10 seconds without stepping out of place
or grabbing hold of anything?
.................................................................................
650 1. yes
80 5. no
20182 blank. inap (inapplicable); partial interview
构造变量
assign: i883_sidebysidecomplete := yes:{previous ask}
seci.balance.sbs.i886_sidebysideholdfulltime
if seci.balance.sbs.i886_sidebysideholdfulltime = yes then
or{previous ask} seci.i845_
if seci.balance.st.i879_semitandemholdfulltime <> yes then
if seci.balance.sbs.i973_sbs_dir = yes then
if seci.balance.sbs.i886_sidebysideholdfulltime = yes then
{previous ask} seci.balance.sbs.i886_sidebysideholdfulltime
if not(seci.balance.sbs.i886_sidebysideholdfulltime = yes) then
if seci.balance.sbs.i886_sidebysideholdfulltime = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i883 balance test s-b-s complete
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.balance.sbs.i883_sidebysidecomplete
balance test - side-by-side stand
did r attempt to complete the side-by-side stand?
.................................................................................
718 1. yes
12 5. no
20182 blank. inap (inapplicable); partial interview
构造变量
assign: i887_sidebysidetime := 10:{previous ask}
seci.balance.sbs.i886_sidebysideholdfulltime
if seci.balance.sbs.i886_sidebysideholdfulltime = yes then
or{previous ask} seci.i845_
if seci.balance.st.i879_semitandemholdfulltime <> yes then
if seci.balance.sbs.i973_sbs_dir = yes then
if seci.balance.sbs.i886_sidebysideholdfulltime = yes then
{previous ask} seci.balance.sbs.i883_sidebysidecomplete
if seci.balance.sbs.i883_sidebysidecomplete = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i887 balance test side-by-side time
section: i level: respondent type: numeric width: 5 decimals: 2
ref: seci.balance.sbs.i887_sidebysidetime
balance test - side-by-side stand
record time in seconds to two decimal places
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
717 010.3899999856949 9.60 1.66 20194
-----------------------------------------------------------------
1 98. dk (don't know); na (not ascertained)
99. rf (refused)
构造变量
{previous ask} seci.balance.sbs.i886_sidebysideholdfulltime
if (seci.balance.sbs.i886_sidebysideholdfulltime = yes) or
(seci.balance.sbs.i883_sidebysidecomplete = yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i888 balance test side-by-side compensatory
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.balance.sbs.i888_sidebysidecompensatory
balance test - side-by-side stand
did r use any compensatory movements of his/her trunk, arms or legs to steady
him/herself during side-by-side stand?
.................................................................................
194 1. yes
524 5. no
8. dk (don't know); na (not ascertained)
20194 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.sbs.i973_sbs_dir
if (seci.balance.sbs.i973_sbs_dir <> yes) or
(seci.balance.sbs.i883_sidebysidecomplete = no) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i884m1 balance test sbs stand reason not comp-1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.balance.sbs.i884_sidebysidewhynotcomplete[1]
balance test - side-by-side stand
why didn't r complete the side-by-side stand?
iwer: enter all that apply
.................................................................................
195 1. r felt it would not be safe
44 2. iwer felt it would not be safe
38 3. r refused or was not willing to complete the test
1 5. r did not understand the instructions
72 6. r has surgery, injury, or other health condition that
prevented r from standing
8 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20554 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.sbs.i973_sbs_dir
if (seci.balance.sbs.i973_sbs_dir <> yes) or
(seci.balance.sbs.i883_sidebysidecomplete = no) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i884m2 balance test sbs stand reason not comp-2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.balance.sbs.i884_sidebysidewhynotcomplete[2]
balance test - side-by-side stand
why didn't r complete the side-by-side stand?
iwer: enter all that apply
.................................................................................
7 1. r felt it would not be safe
93 2. iwer felt it would not be safe
5 3. r refused or was not willing to complete the test
5. r did not understand the instructions
21 6. r has surgery, injury, or other health condition that
prevented r from standing
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20785 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.sbs.i973_sbs_dir
if (seci.balance.sbs.i973_sbs_dir <> yes) or
(seci.balance.sbs.i883_sidebysidecomplete = no) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i884m3 balance test sbs stand reason not comp-3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.balance.sbs.i884_sidebysidewhynotcomplete[3]
balance test - side-by-side stand
iwer: why didn't r complete the side-by-side stand?
iwer: select all that apply
.................................................................................
1. r felt it would not be safe
1 2. iwer felt it would not be safe
4 3. r refused or was not willing to complete the test
5. r did not understand the instructions
48 6. r has surgery, injury, or other health condition that
prevented r from standing
2 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20857 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.sbs.i973_sbs_dir
if (seci.balance.sbs.i973_sbs_dir <> yes) or
(seci.balance.sbs.i883_sidebysidecomplete = no) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i884m4 balance test sbs stand reason not comp-4
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.balance.sbs.i884_sidebysidewhynotcomplete[4]
balance test - side-by-side stand
why didn't r complete the side-by-side stand?
iwer: enter all that apply
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
5. r did not understand the instructions
3 6. r has surgery, injury, or other health condition that
prevented r from standing
5 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20904 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.sbs.i973_sbs_dir
if (seci.balance.sbs.i973_sbs_dir <> yes) or
(seci.balance.sbs.i883_sidebysidecomplete = no) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i884m5 balance test sbs stand reason not comp-5
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.balance.sbs.i884_sidebysidewhynotcomplete[5]
balance test - side-by-side stand
why didn't r complete the side-by-side stand?
iwer: enter all that apply
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
5. r did not understand the instructions
6. r has surgery, injury, or other health condition that
prevented r from standing
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
构造变量
if not st.i879_semitandemholdfulltime <> yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i975 r understanding of full tandem balance test procedure
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.balance.ft.i975_ft_dir
full tandem stand
do you understand these directions and feel it would be safe for you to do this
measurement?
.................................................................................
7126 1. yes
117 5. no
13669 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.ft.i624_ft_instruct2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i896 balance test full tandem hold full time
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.balance.ft.i896_fulltandemholdfulltime
balance test - full tandem stand
did r hold full tandem stand for full [30/60] seconds without stepping out of
place or grabbing hold of anything?
.................................................................................
5240 1. yes
1886 5. no
13786 blank. inap (inapplicable); partial interview
构造变量
assign: i893_fulltandemcomplete := yes:{previous ask}
seci.balance.ft.i893_fulltandemcomplete
if seci.balance.ft.i896_fulltandemholdfulltime = yes then
or{previous ask} seci.i845_
if not(seci.balance.st.i879_semitandemholdfulltime <> yes) then
if seci.balance.ft.i975_ft_dir = yes then
if not(seci.balance.ft.i896_fulltandemholdfulltime = no) then
if seci.balance.ft.i896_fulltandemholdfulltime = yes then
{previous ask} seci.balance.ft.i896_fulltandemholdfulltime
if seci.balance.ft.i896_fulltandemholdfulltime = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i893 balance test full tandem complete
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.balance.ft.i893_fulltandemcomplete
balance test - full tandem stand
did r attempt to complete the full tandem stand?
.................................................................................
7066 1. yes
60 5. no
13786 blank. inap (inapplicable); partial interview
构造变量
assign: i897_fulltandemtime := x3060:{previous ask}
seci.balance.ft.i893_fulltandemcomplete
if seci.balance.ft.i896_fulltandemholdfulltime = yes then
or{previous ask} seci.i845_
if not(seci.balance.st.i879_semitandemholdfulltime <> yes) then
if seci.balance.ft.i975_ft_dir = yes then
if not(seci.balance.ft.i896_fulltandemholdfulltime = no) then
if seci.balance.ft.i896_fulltandemholdfulltime = yes then
{previous ask} seci.balance.ft.i893_fulltandemcomplete
if seci.balance.ft.i893_fulltandemcomplete = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i897 balance test full tandem time
section: i level: respondent type: numeric width: 6 decimals: 2
ref: seci.balance.ft.i897_fulltandemtime
balance test - full tandem stand
iwer: record time in seconds to two decimal places
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
7063 0100.439999818802 43.95 20.26 13846
-----------------------------------------------------------------
1 998. dk (don't know); na (not ascertained)
2 999. rf (refused)
构造变量
{previous ask} seci.balance.ft.i896_fulltandemholdfulltime
if (seci.balance.ft.i893_fulltandemcomplete = yes) or
(seci.balance.ft.i893_fulltandemcomplete = yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i898 balance test full tandem compensatory
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.balance.ft.i898_fulltandemcompensatory
balance test - full tandem stand
did r use any compensatory movements of his/her trunk, arms or legs to steady
him/herself during full tandem stand?
.................................................................................
3391 1. yes
3675 5. no
8. dk (don't know); na (not ascertained)
13846 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.ft.i975_ft_dir
if (seci.balance.ft.i975_ft_dir <> yes) or
(seci.balance.ft.i893_fulltandemcomplete = no) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i894m1 balance full tandem stand-not complete-1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.balance.ft.i894_fulltandemwhynotcomplete[1]
balance test - full tandem stand
why didn't r complete the full-tandem stand?
iwer: enter all that apply
.................................................................................
119 1. r felt it would not be safe
13 2. iwer felt it would not be safe
6 3. r refused or was not willing to complete the test
23 4. r tried but was unable to complete test
1 5. r did not understand the instructions
14 6. r had surgery, injury or other health condition that
prevented r from standing
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20735 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.ft.i975_ft_dir
if (seci.balance.ft.i975_ft_dir <> yes) or
(seci.balance.ft.i893_fulltandemcomplete = no) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i894m2 balance full tandem stand-not complete-2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.balance.ft.i894_fulltandemwhynotcomplete[2]
balance test - full tandem stand
why didn't r complete the full-tandem stand?
iwer: enter all that apply
.................................................................................
2 1. r felt it would not be safe
31 2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
5 6. r had surgery, injury or other health condition that
prevented r from standing
5 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20869 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.ft.i975_ft_dir
if (seci.balance.ft.i975_ft_dir <> yes) or
(seci.balance.ft.i893_fulltandemcomplete = no) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i894m3 balance full tandem stand-not complete-3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.balance.ft.i894_fulltandemwhynotcomplete[3]
balance test - full tandem stand
why didn't r complete the full-tandem stand?
iwer: enter all that apply
.................................................................................
1. r felt it would not be safe
1 2. iwer felt it would not be safe
3 3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
7 6. r had surgery, injury or other health condition that
prevented r from standing
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20900 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.ft.i975_ft_dir
if (seci.balance.ft.i975_ft_dir <> yes) or
(seci.balance.ft.i893_fulltandemcomplete = no) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i894m4 balance full tandem stand-not complete-4
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.balance.ft.i894_fulltandemwhynotcomplete[4]
balance test - full tandem stand
why didn't r complete the full-tandem stand?
iwer: enter all that apply
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
1 6. r had surgery, injury or other health condition that
prevented r from standing
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20910 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.balance.ft.i975_ft_dir
if (seci.balance.ft.i975_ft_dir <> yes) or
(seci.balance.ft.i893_fulltandemcomplete = no) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i894m5 balance full tandem stand-not complete-5
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.balance.ft.i894_fulltandemwhynotcomplete[5]
balance test - full tandem stand
why didn't r complete the full-tandem stand?
iwer: enter all that apply
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
6. r had surgery, injury or other health condition that
prevented r from standing
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i803_eligible
if seci.xwalkingeligible = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i977 walking speed screening question
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.walking.i977_ws_intro
walking speed
next, i would like to assess whether you can walk a very short distance
comfortably (using a walking stick or other aid if necessary).
do you have any problems from recent surgery, injury, or other health conditions
that might prevent you from walking?
.................................................................................
3555 1. no apparent restriction
42 2. yes, recent surgery
38 3. yes, injury
146 4. yes
17131 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.walking.i626_ws_demovideo
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i978 r understanding of walking speed procedure
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.walking.i978_ws_dir
walking speed
do you understand these directions and feel it would be safe for you to do this
measurement?
.................................................................................
3479 1. yes
76 5. no
17357 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.walking.i977_ws_intro
if (seci.walking.i977_ws_intro = no) and (seci.walking.i978_ws_dir = yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i823 walking test 1st trial time
section: i level: respondent type: numeric width: 6 decimals: 2
ref: seci.walking.i823_twalk1sttrialtime
walking speed
time from first trial
iwer: record time in seconds to two decimal places
iwer: enter [993] if r was unable to do it
iwer: enter [999] if r chose not to do it
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
3448 0 90 4.13 2.73 17433
-----------------------------------------------------------------
2 315-401. out of range
19 993. r unable to do it
1 998. dk (don't know); na (not ascertained)
9 999. r chose not to do it
构造变量
{previous ask} seci.walking.i823_twalk1sttrialtime
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i824 walking test 2nd trial time
section: i level: respondent type: numeric width: 6 decimals: 2
ref: seci.walking.i824_twalk2ndtrialtime
walking speed
time from second trial
iwer: record time in seconds to two decimal places
iwer: enter [993] if r was unable to do it
iwer: enter [999] if r chose not to do it
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
3447 053.0999999046326 3.83 2.24 17433
-----------------------------------------------------------------
3 105-424. out of range
18 993. r was unable to do it
1 998. dk (don't know); na (not ascertained)
10 999. r chose not to do it
构造变量
assign: i820_ := xi820_:{previous ask} seci.walking.i820_
or{previous ask} seci.i845_
if (seci.walking.i977_ws_intro = no) and (seci.walking.i978_ws_dir = yes) then
if not(seci.walking.xi820_ = empty) then
{previous ask} seci.walking.i824_twalk2ndtrialtime
if seci.walking.xi820_ = empty then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i820 walking test complete at least one trial
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.walking.i820_
walking speed
did r complete at least one trial of the walking test?
.................................................................................
3450 1. yes
29 5. no
17433 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.walking.i824_twalk2ndtrialtime
if seci.walking.i820_ = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i828 walking aid type
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.walking.i828_twalktypeofaid
walking speed
record type of aid used
.................................................................................
3257 1. none
109 2. walking stick or cane
3. elbow crutches
80 4. walking frame
4 7. other (specify)
8. dk (don't know); na (not ascertained)
9. rf (refused)
17462 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.walking.i828_twalktypeofaid
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i660 completed walking speed as directed
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.walking.i660_twalkrdirect
walking speed
did the respondent complete this measurement according to the stated directions?
.................................................................................
3381 1. r followed directions
35 2. r did not appear to walk at their normal pace
18 3. r did not continue walking beyond the end of the course
16 7. other (specify)
8. dk (don't know); na (not ascertained)
9. rf (refused)
17462 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.walking.i977_ws_intro
if ((seci.walking.i977_ws_intro <> no) or (seci.walking.i978_ws_dir <> yes)) or
(seci.walking.i820_ <> yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i821m1 walking test reason not complete -1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.walking.i821_[1]
walking speed
why didn't r complete the walking test?
iwer: enter all that apply
.................................................................................
129 1. r felt it would not be safe
33 2. iwer felt it would not be safe
22 3. r refused or was not willing to complete the test
3 4. r tried but was unable to complete test
1 5. r did not understand the instructions
91 6. r had surgery, injury, or other health condition that
prevented r from walking
49 7. no suitable space available
2 8. problem with equipment or supplies
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20581 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.walking.i977_ws_intro
if ((seci.walking.i977_ws_intro <> no) or (seci.walking.i978_ws_dir <> yes)) or
(seci.walking.i820_ <> yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i821m2 walking test reason not complete -2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.walking.i821_[2]
walking speed
why didn't r complete the walking test?
iwer: enter all that apply
.................................................................................
6 1. r felt it would not be safe
59 2. iwer felt it would not be safe
3 3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
26 6. r had surgery, injury, or other health condition that
prevented r from walking
7 7. no suitable space available
8. problem with equipment or supplies
6 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20805 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.walking.i977_ws_intro
if ((seci.walking.i977_ws_intro <> no) or (seci.walking.i978_ws_dir <> yes)) or
(seci.walking.i820_ <> yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i821m3 walking test reason not complete -3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.walking.i821_[3]
walking speed
why didn't r complete the walking test?
iwer: enter all that apply
.................................................................................
1. r felt it would not be safe
6 2. iwer felt it would not be safe
1 3. r refused or was not willing to complete the test
1 4. r tried but was unable to complete test
5. r did not understand the instructions
31 6. r had surgery, injury, or other health condition that
prevented r from walking
7 7. no suitable space available
8. problem with equipment or supplies
5 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20861 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.walking.i977_ws_intro
if ((seci.walking.i977_ws_intro <> no) or (seci.walking.i978_ws_dir <> yes)) or
(seci.walking.i820_ <> yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i821m4 walking test reason not complete -4
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.walking.i821_[4]
walking speed
why didn't r complete the walking test?
iwer: enter all that apply
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
1 3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
1 6. r had surgery, injury, or other health condition that
prevented r from walking
4 7. no suitable space available
8. problem with equipment or supplies
4 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20902 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.walking.i977_ws_intro
if ((seci.walking.i977_ws_intro <> no) or (seci.walking.i978_ws_dir <> yes)) or
(seci.walking.i820_ <> yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i821m5 walking test reason not complete -5
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.walking.i821_[5]
walking speed
why didn't r complete the walking test?
iwer: enter all that apply
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
6. r had surgery, injury, or other health condition that
prevented r from walking
7. no suitable space available
8. problem with equipment or supplies
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20911 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.walking.i977_ws_intro
if ((seci.walking.i977_ws_intro <> no) or (seci.walking.i978_ws_dir <> yes)) or
(seci.walking.i820_ <> yes) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i821m6 walking test reason not complete -6
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.walking.i821_[6]
walking speed
why didn't r complete the walking test?
iwer: enter all that apply
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the test
4. r tried but was unable to complete test
5. r did not understand the instructions
6. r had surgery, injury, or other health condition that
prevented r from walking
7. no suitable space available
8. problem with equipment or supplies
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
构造变量
if xweightceligible = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i980 height safety question
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.rweight.i980_ht_dir
do you understand these directions and feel it would be safe for you to do this
measurement?
.................................................................................
277 1. yes
7 5. no
20628 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.waist.i635_wa_demovid
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i687m1 r felt safe to do other phys measures - 1
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.waist.i687_hwwdir[1]
weight and waist circumference measurements
do you understand these directions and feel it would be safe for you to do the
height [,weight] and waist-circumference measurements?
.................................................................................
355 1. height
12 2. weight
50 3. waist-circumference
7714 4. all
188 5. none
12593 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.waist.i635_wa_demovid
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i687m2 r felt safe to do other phys measures - 2
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.waist.i687_hwwdir[2]
weight and waist circumference measurements
do you understand these directions and feel it would be safe for you to do the
height [,weight] and waist-circumference measurements?
.................................................................................
1. height
76 2. weight
97 3. waist-circumference
4. all
5. none
20739 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.waist.i635_wa_demovid
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i687m3 r felt safe to do other phys measures - 3
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.waist.i687_hwwdir[3]
weight and waist circumference measurements
do you understand these directions and feel it would be safe for you to do the
height [,weight] and waist-circumference measurements?
.................................................................................
1 1. height
2. weight
60 3. waist-circumference
4. all
5. none
20851 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.waist.i635_wa_demovid
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i687m4 r felt safe to do other phys measures - 4
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.waist.i687_hwwdir[4]
weight and waist circumference measurements
do you understand these directions and feel it would be safe for you to do the
height [,weight] and waist-circumference measurements?
.................................................................................
1. height
2. weight
3. waist-circumference
4. all
5. none
20912 blank. inap (inapplicable); partial interview
构造变量
assign: waist.i985_wa_dir := no:{previous ask} seci.i803_eligible
if seci.waist.i687_hwwdir <> empty and seci.i936_physmeasbio_completionflag <>
empty then
if not((wcircum in seci.waist.i687_hwwdir) or (all in seci.waist.i687_hwwdir))
then
assign: waist.i985_wa_dir := yes:{previous ask} seci.i803_eligible
if seci.waist.i687_hwwdir <> empty and seci.i936_physmeasbio_completionflag <>
empty then
if (wcircum in seci.waist.i687_hwwdir) or (all in seci.waist.i687_hwwdir) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i985 r understanding of waist measurement procedure
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.waist.i985_wa_dir
waist circumference
do you understand these directions and feel it would be safe for you to do this
measurement?
.................................................................................
273 1. yes
11 5. no
20628 blank. inap (inapplicable); partial interview
构造变量
assign: waist.i982_wt_dir := empty:{previous ask} seci.i803_eligible
if seci.waist.i687_hwwdir <> empty and seci.i936_physmeasbio_completionflag <>
empty then
if (_weight in seci.waist.i687_hwwdir) or (all in seci.waist.i687_hwwdir) then
if not(piseccweighc139_ < 300) then
assign: waist.i982_wt_dir := no:{previous ask} seci.i803_eligible
if seci.waist.i687_hwwdir <> empty and seci.i936_physmeasbio_completionflag <>
empty then
if not((_weight in seci.waist.i687_hwwdir) or (all in seci.waist.i687_hwwdir))
then
assign: waist.i982_wt_dir := yes:{previous ask} seci.i803_eligible
if seci.waist.i687_hwwdir <> empty and seci.i936_physmeasbio_completionflag <>
empty then
if (_weight in seci.waist.i687_hwwdir) or (all in seci.waist.i687_hwwdir) then
if piseccweighc139_ < 300 then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i982 r felt safe to do waist measurement
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.waist.i982_wt_dir
do you understand these directions and feel it would be safe for you to do this
measurement?
.................................................................................
264 1. yes
14 5. no
20634 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i600_pmconsentintro
if (seci.i802_pmconsent = no) or (seci.i802_pmconsent = refusal) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i954m1 why no consent physical measures -1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.i954_whynoconsentphysmeas[1]
physical measures
why didn't r sign the physical measures consent form?
iwer: enter all that apply.
.................................................................................
54 1. r felt it would not be safe
14 2. iwer felt it would not be safe
410 3. r refused or was not willing to complete the measurements
50 6. r could not complete the measurement due to health reasons
32 7. no suitable space
24 97. other (specify)
98. dk (don't know); na (not ascertained)
3 99. rf (refused)
20325 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i600_pmconsentintro
if (seci.i802_pmconsent = no) or (seci.i802_pmconsent = refusal) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i954m2 why no consent physical measures -2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.i954_whynoconsentphysmeas[2]
physical measures
why didn't r sign the physical measures consent form?
iwer: enter all that apply.
.................................................................................
5 1. r felt it would not be safe
17 2. iwer felt it would not be safe
12 3. r refused or was not willing to complete the measurements
25 6. r could not complete the measurement due to health reasons
11 7. no suitable space
30 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20812 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i600_pmconsentintro
if (seci.i802_pmconsent = no) or (seci.i802_pmconsent = refusal) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i954m3 why no consent physical measures -3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.i954_whynoconsentphysmeas[3]
physical measures
why didn't r sign the physical measures consent form?
iwer: enter all that apply.
.................................................................................
3 1. r felt it would not be safe
1 2. iwer felt it would not be safe
8 3. r refused or was not willing to complete the measurements
9 6. r could not complete the measurement due to health reasons
2 7. no suitable space
2 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20887 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i600_pmconsentintro
if (seci.i802_pmconsent = no) or (seci.i802_pmconsent = refusal) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i954m4 why no consent physical measures -4
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.i954_whynoconsentphysmeas[4]
physical measures
why didn't r sign the physical measures consent form?
iwer: enter all that apply
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
1 3. r refused or was not willing to complete the measurements
4 6. r could not complete the measurement due to health reasons
1 7. no suitable space
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20905 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i600_pmconsentintro
if (seci.i802_pmconsent = no) or (seci.i802_pmconsent = refusal) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i954m5 why no consent physical measures -5
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.i954_whynoconsentphysmeas[5]
physical measures
why didn't r sign the physical measures consent form?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the measurements
6. r could not complete the measurement due to health reasons
7. no suitable space
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20911 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i600_pmconsentintro
if (seci.i802_pmconsent = no) or (seci.i802_pmconsent = refusal) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i954m6 why no consent physical measures -6
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.i954_whynoconsentphysmeas[6]
physical measures
why didn't r sign the physical measures consent form?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the measurements
6. r could not complete the measurement due to health reasons
7. no suitable space
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
构造变量
assign: i913_salivaconsent := empty:{previous ask}
seci.saliva.i913_salivaconsent
if seci.saliva.salivaconsent_result = suppressed then
or{previous ask} seci.i845_
if not(seci.saliva.i694_salivaconsentcomplete = 1) then
if seci.saliva.salivaconsent_result = suppressed then
assign: i913_salivaconsent := yes:{previous ask} seci.saliva.i638_salcnsnt
if seci.saliva.i694_salivaconsentcomplete = 1 then
or{previous ask} seci.i845_
if seci.saliva.i694_salivaconsentcomplete = 1 then
{previous ask} seci.saliva.i638_salcnsnt
if not(seci.saliva.i694_salivaconsentcomplete = 1) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i913 saliva consent
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.saliva.i913_salivaconsent
saliva sample
iwer: did r sign the consent form for the saliva sample?
.................................................................................
2809 1. yes
853 5. no
17250 blank. inap (inapplicable); partial interview
构造变量
if i913_salivaconsent = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i987 r understanding of saliva procedure
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.saliva.i987_sal_dir
saliva sample
do you understand these directions and feel it would be safe for you to do this
measurement?
.................................................................................
2745 1. yes
64 5. no
18103 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.saliva.i987_sal_dir
if seci.saliva.i987_sal_dir = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i914 saliva sample eat drink etc
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.saliva.i914_salivaeatdranketc
saliva sample
did the r eat, drink, smoke or brush his/her teeth after starting the physical
measures?
.................................................................................
237 1. yes
2508 5. no
8. dk (don't know); na (not ascertained)
9. rf (refused)
18167 blank. inap (inapplicable); partial interview
构造变量
if val (i933_salivabarcodeid) <> 999 then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i639 saliva tips for respondent
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.saliva.i639_saldefer
saliva sample
would you like to allow additional time for the respondent to fill the saliva
collection vial?
iwer: if no, enter [5] to finish the saliva collection.
iwer: if yes, enter [1] to allow more time. you will finish the saliva
collection (shipping and observations) after the blood-spot observations.
.................................................................................
605 1. yes
2125 5. no
18182 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.saliva.i638_salcnsnt
if seci.saliva.i913_salivaconsent = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i941m1 why no consent saliva-1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.saliva.i941_whynoconsentsaliva[1]
saliva sample
why didn't r sign the saliva consent form?
iwer: enter all that apply.
.................................................................................
44 1. r felt it would not be safe
4 2. iwer felt it would not be safe
705 3. r refused or was not willing to complete the measurement
4 5. r did not understand the instructions
33 6. r could not complete the measurement due to health reasons
23 7. no suitable space
13 8. r ate, drank, smoked, or brushed teeth in last 30 minutes
15 9. problem with equipment or supplies
12 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20059 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.saliva.i638_salcnsnt
if seci.saliva.i913_salivaconsent = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i941m2 why no consent saliva-2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.saliva.i941_whynoconsentsaliva[2]
saliva sample
why didn't r sign the saliva consent form?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
6 2. iwer felt it would not be safe
11 3. r refused or was not willing to complete the measurement
5. r did not understand the instructions
10 6. r could not complete the measurement due to health reasons
3 7. no suitable space
9 8. r ate, drank, smoked, or brushed teeth in last 30 minutes
9. problem with equipment or supplies
30 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20843 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.saliva.i638_salcnsnt
if seci.saliva.i913_salivaconsent = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i941m3 why no consent saliva-3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.saliva.i941_whynoconsentsaliva[3]
saliva sample
why didn't r sign the saliva consent form?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
1 3. r refused or was not willing to complete the measurement
5. r did not understand the instructions
3 6. r could not complete the measurement due to health reasons
1 7. no suitable space
1 8. r ate, drank, smoked, or brushed teeth in last 30 minutes
9. problem with equipment or supplies
2 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20904 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.saliva.i638_salcnsnt
if seci.saliva.i913_salivaconsent = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i941m4 why no consent saliva-4
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.saliva.i941_whynoconsentsaliva[4]
saliva sample
why didn't r sign the saliva consent form?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the measurement
5. r did not understand the instructions
6. r could not complete the measurement due to health reasons
7. no suitable space
1 8. r ate, drank, smoked, or brushed teeth in last 30 minutes
9. problem with equipment or supplies
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20911 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.saliva.i638_salcnsnt
if (((seci.saliva.i987_sal_dir <> yes) or (val
(seci.saliva.i933_salivabarcodeid) = 999)) or ((seci.saliva.i639_saldefer = no)
and (seci.saliva.i915_salivacomplete = no))) and
seci.saliva.i941_whynoconsentsaliva = empty then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i916m1 saliva why not complete-1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.saliva.i916_salivawhynotcomplete[1]
saliva sample
why didn't r complete the saliva sample?
iwer: enter all that apply.
.................................................................................
8 1. r felt it would not be safe
2 2. iwer felt it would not be safe
49 3. r refused or was not willing to complete the measurement
10 4. r tried but was unable to complete measurement
5. r did not understand the instructions
3 6. r ate, drank, smoked, or brushed teeth in last 30 minutes
2 7. no suitable space
9 8. problem with equipment or supplies
4 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20825 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.saliva.i638_salcnsnt
if (((seci.saliva.i987_sal_dir <> yes) or (val
(seci.saliva.i933_salivabarcodeid) = 999)) or ((seci.saliva.i639_saldefer = no)
and (seci.saliva.i915_salivacomplete = no))) and
seci.saliva.i941_whynoconsentsaliva = empty then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i916m2 saliva why not complete-2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.saliva.i916_salivawhynotcomplete[2]
saliva sample
why didn't r complete the saliva sample?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the measurement
4. r tried but was unable to complete measurement
5. r did not understand the instructions
6. r ate, drank, smoked, or brushed teeth in last 30 minutes
7. no suitable space
8. problem with equipment or supplies
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
i918 saliva fill vial
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.saliva.i918_salivafillvial
saliva sample
did r fill the vial to the desired level?
.................................................................................
2323 1. yes
406 5. no
18183 blank. inap (inapplicable); partial interview
i915 saliva sample complete
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.saliva.i915_salivacomplete
saliva sample
did r attempt to complete the saliva sample?
.................................................................................
2721 1. yes
8 5. no
18183 blank. inap (inapplicable); partial interview
i919m1 saliva problems-1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.saliva.i919_salivaproblems[1]
saliva sample
what, if any, problems occurred?
iwer: enter all that apply
.................................................................................
2358 1. none
2. solution in cover leaked before vial was sealed
13 3. saliva spilled
310 4. r was unable to produce enough saliva
40 97. other (specify)
18191 blank. inap (inapplicable); partial interview
i919m2 saliva problems-2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.saliva.i919_salivaproblems[2]
saliva sample
what, if any, problems occurred?
iwer: enter all that apply
.................................................................................
1. none
2. solution in cover leaked before vial was sealed
3. saliva spilled
3 4. r was unable to produce enough saliva
13 97. other (specify)
20896 blank. inap (inapplicable); partial interview
i919m3 saliva problems-3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.saliva.i919_salivaproblems[3]
saliva sample
what, if any, problems occurred?
iwer: enter all that apply
.................................................................................
1. none
2. solution in cover leaked before vial was sealed
3. saliva spilled
4. r was unable to produce enough saliva
97. other (specify)
20912 blank. inap (inapplicable); partial interview
构造变量
assign: i922_bloodconsent := empty:{previous ask}
seci.bloodspot.i922_bloodconsent
if seci.bloodspot.bloodconsent_result = suppressed then
or{previous ask} seci.i845_
if not(seci.bloodspot.i697_bloodconsentcomplete = 1) then
if seci.bloodspot.bloodconsent_result = suppressed then
assign: i922_bloodconsent := yes:{previous ask} seci.bloodspot.i648_bldintro
if seci.bloodspot.i697_bloodconsentcomplete = 1 then
or{previous ask} seci.i845_
if seci.bloodspot.i697_bloodconsentcomplete = 1 then
{previous ask} seci.bloodspot.i648_bldintro
if not(seci.bloodspot.i697_bloodconsentcomplete = 1) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i922 blood sample consent
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.bloodspot.i922_bloodconsent
blood sample
iwer: did r sign the blood sample consent form?
.................................................................................
7720 1. yes
1181 5. no
12011 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.bloodspot.i648_bldintro
if seci.bloodspot.i922_bloodconsent = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i943m1 why no consent blood-1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.bloodspot.i943_whynoconsentblood[1]
blood sample
why didn't r sign the blood consent form?
iwer: enter all that apply.
.................................................................................
114 1. r felt it would not be safe
15 2. iwer felt it would not be safe
928 3. r refused or was not willing to complete the measurement
11 5. r did not understand the instructions
42 6. r has hemophilia or is on medication that thins the blood
(anticoagulant); other health reason
32 7. no suitable space
19 9. problem with equipment or supplies
18 97. other (specify)
98. dk (don't know); na (not ascertained)
2 99. rf (refused)
19731 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.bloodspot.i648_bldintro
if seci.bloodspot.i922_bloodconsent = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i943m2 why no consent blood-2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.bloodspot.i943_whynoconsentblood[2]
blood sample
why didn't r sign the blood consent form?
iwer: enter all that apply.
.................................................................................
4 1. r felt it would not be safe
13 2. iwer felt it would not be safe
27 3. r refused or was not willing to complete the measurement
1 5. r did not understand the instructions
4 6. r has hemophilia or is on medication that thins the blood
(anticoagulant); other health reason
12 7. no suitable space
1 9. problem with equipment or supplies
42 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20808 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.bloodspot.i648_bldintro
if seci.bloodspot.i922_bloodconsent = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i943m3 why no consent blood-3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.bloodspot.i943_whynoconsentblood[3]
blood sample
why didn't r sign the blood consent form?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
1 2. iwer felt it would not be safe
3 3. r refused or was not willing to complete the measurement
5. r did not understand the instructions
3 6. r has hemophilia or is on medication that thins the blood
(anticoagulant); other health reason
4 7. no suitable space
9. problem with equipment or supplies
12 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20889 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.bloodspot.i648_bldintro
if seci.bloodspot.i922_bloodconsent = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i943m4 why no consent blood-4
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.bloodspot.i943_whynoconsentblood[4]
blood sample
why didn't r sign the blood consent form?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the measurement
5. r did not understand the instructions
1 6. r has hemophilia or is on medication that thins the blood
(anticoagulant); other health reason
7. no suitable space
9. problem with equipment or supplies
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20910 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.bloodspot.i648_bldintro
if seci.bloodspot.i922_bloodconsent = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i943m5 why no consent blood-5
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.bloodspot.i943_whynoconsentblood[5]
blood sample
why didn't r sign the blood consent form?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the measurement
5. r did not understand the instructions
6. r has hemophilia or is on medication that thins the blood
(anticoagulant); other health reason
7. no suitable space
9. problem with equipment or supplies
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20911 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.bloodspot.i648_bldintro
if seci.bloodspot.i922_bloodconsent = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i943m6 why no consent blood-6
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.bloodspot.i943_whynoconsentblood[6]
blood sample
why didn't r sign the blood consent form?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the measurement
5. r did not understand the instructions
6. r has hemophilia or is on medication that thins the blood
(anticoagulant); other health reason
7. no suitable space
9. problem with equipment or supplies
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
构造变量
if i922_bloodconsent = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i989 r understanding of blood-collection procedure
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.bloodspot.i989_bld_dir
blood sample
do you understand these directions and feel it would be safe for you to do this
measurement?
.................................................................................
7647 1. yes
73 5. no
13192 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.bloodspot.i657_bld_instruct2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i929 amount of blood on first card
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.bloodspot.i929_bloodspotcard1
blood sample
how many circles were filled on the first card?
.................................................................................
63 0. zero
37 1. one
74 2. two
963 3. three
279 4. four
6221 5. five
8. dk (don't know); na (not ascertained)
9. rf (refused)
13275 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.bloodspot.i929_bloodspotcard1
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i945 amount of blood on storage card
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.bloodspot.i945_bloodspotcard2
blood sample
how many circles were filled on the storage card?
.................................................................................
194 0. zero
75 1. one
143 2. two
1124 3. three
312 4. four
5789 5. five
8. dk (don't know); na (not ascertained)
9. rf (refused)
13275 blank. inap (inapplicable); partial interview
构造变量
assign: i923_bloodcomplete := yes:{previous ask}
seci.bloodspot.i923_bloodcomplete
or{previous ask} seci.i845_
if seci.bloodspot.i922_bloodconsent = yes then
if seci.bloodspot.i989_bld_dir = yes then
if val (seci.bloodspot.i934_bloodbarcodeid1) <> 999 then
if val (seci.bloodspot.i935_bloodbarcodeid2) <> 999 then
if not(seci.bloodspot.xi923_bloodcomplete = 0) then
{previous ask} seci.bloodspot.i945_bloodspotcard2
if seci.bloodspot.xi923_bloodcomplete = 0 then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i923 blood sample complete
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.bloodspot.i923_bloodcomplete
blood sample
did r attempt to complete the blood sample?
.................................................................................
7635 1. yes
2 5. no
13275 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.bloodspot.i945_bloodspotcard2
if seci.bloodspot.i923_bloodcomplete = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i926m1 blood sample what problems-1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.bloodspot.i926_bloodwhatproblems[1]
blood sample
what, if any, problems occurred during the collection of the blood sample?
iwer: enter all that apply
.................................................................................
6931 1. none
12 2. r became lightheaded, fainted, or became nauseous
40 3. r had difficulty getting finger to stop bleeding
245 4. unable to obtain enough blood
5 5. problem with equipment or supplies
401 97. other (specify)
98. dk (don't know); na (not ascertained)
1 99. rf (refused)
13277 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.bloodspot.i945_bloodspotcard2
if seci.bloodspot.i923_bloodcomplete = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i926m2 blood sample what problems-2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.bloodspot.i926_bloodwhatproblems[2]
blood sample
what, if any, problems occurred during the collection of the blood sample?
iwer: enter all that apply
.................................................................................
1. none
1 2. r became lightheaded, fainted, or became nauseous
3. r had difficulty getting finger to stop bleeding
1 4. unable to obtain enough blood
5. problem with equipment or supplies
3 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20907 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.bloodspot.i945_bloodspotcard2
if seci.bloodspot.i923_bloodcomplete = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i926m3 blood sample what problems-3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.bloodspot.i926_bloodwhatproblems[3]
blood sample
what, if any, problems occurred during the collection of the blood sample?
iwer: enter all that apply
.................................................................................
1. none
2. r became lightheaded, fainted, or became nauseous
3. r had difficulty getting finger to stop bleeding
4. unable to obtain enough blood
5. problem with equipment or supplies
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.bloodspot.i648_bldintro
if ((((seci.bloodspot.i989_bld_dir <> yes) or
(seci.bloodspot.i923_bloodcomplete <> yes)) or (val
(seci.bloodspot.i934_bloodbarcodeid1) = 999)) or (val
(seci.bloodspot.i935_bloodbarcodeid2) = 999)) and
seci.bloodspot.i943_whynoconsentblood = empty then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i924m1 why blood sample not complete-1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.bloodspot.i924_bloodwhynotcomplete[1]
blood sample
why didn't r complete the blood sample?
iwer: enter all that apply.
.................................................................................
15 1. r felt it would not be safe
1 2. iwer felt it would not be safe
56 3. r refused or was not willing to complete the measurement
1 4. r tried but was unable to complete measurement
5. r did not understand the instructions
4 6. r has hemophilia or is on medication that thins the blood
(anticoagulant); other health reason
2 7. no suitable space
2 8. problem with equipment or supplies
1 97. other (specify)
98. dk (don't know); na (not ascertained)
20830 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.bloodspot.i648_bldintro
if ((((seci.bloodspot.i989_bld_dir <> yes) or
(seci.bloodspot.i923_bloodcomplete <> yes)) or (val
(seci.bloodspot.i934_bloodbarcodeid1) = 999)) or (val
(seci.bloodspot.i935_bloodbarcodeid2) = 999)) and
seci.bloodspot.i943_whynoconsentblood = empty then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i924m2 why blood sample not complete-2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.bloodspot.i924_bloodwhynotcomplete[2]
blood sample
why didn't r complete the blood sample?
iwer: enter all that apply.
.................................................................................
1 1. r felt it would not be safe
2. iwer felt it would not be safe
2 3. r refused or was not willing to complete the measurement
4. r tried but was unable to complete measurement
5. r did not understand the instructions
1 6. r has hemophilia or is on medication that thins the blood
(anticoagulant); other health reason
7. no suitable space
8. problem with equipment or supplies
4 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20904 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.bloodspot.i648_bldintro
if ((((seci.bloodspot.i989_bld_dir <> yes) or
(seci.bloodspot.i923_bloodcomplete <> yes)) or (val
(seci.bloodspot.i934_bloodbarcodeid1) = 999)) or (val
(seci.bloodspot.i935_bloodbarcodeid2) = 999)) and
seci.bloodspot.i943_whynoconsentblood = empty then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i924m3 why blood sample not complete-3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.bloodspot.i924_bloodwhynotcomplete[3]
blood sample
why didn't r complete the blood sample?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the measurement
4. r tried but was unable to complete measurement
5. r did not understand the instructions
6. r has hemophilia or is on medication that thins the blood
(anticoagulant); other health reason
7. no suitable space
8. problem with equipment or supplies
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
构造变量
if not(_height in waist.i687_hwwdir) or (all in waist.i687_hwwdir) and if
waist.x687 <> waist.i687_hwwdir
if pii980 <> no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i831 measure r height
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.height2.i831_
height
were you able to measure r's height?
.................................................................................
8059 1. yes
256 5. no
12597 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i659_i660_dataentryintro
if seci.height2.i831_ = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i832m1 height reason not complete -1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.height2.i832_[1]
height
why weren't you able to measure r's height?
iwer: enter all that apply
.................................................................................
91 1. r felt it would not be safe
21 2. iwer felt it would not be safe
74 3. r refused or was not willing to complete the measurement
13 4. r tried but was unable to complete measurement
1 5. r did not understand the instructions
3 6. respondent too tall, interviewer could not reach
11 7. no suitable space available
2 8. problem with equipment or supplies
37 9. r is not able to stand; other health reason
3 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20656 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i659_i660_dataentryintro
if seci.height2.i831_ = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i832m2 height reason not complete -2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.height2.i832_[2]
height
why weren't you able to measure r's height?
iwer: enter all that apply
.................................................................................
4 1. r felt it would not be safe
38 2. iwer felt it would not be safe
8 3. r refused or was not willing to complete the measurement
4. r tried but was unable to complete measurement
1 5. r did not understand the instructions
6. respondent too tall, interviewer could not reach
7. no suitable space available
1 8. problem with equipment or supplies
2 9. r is not able to stand; other health reason
4 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20854 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i659_i660_dataentryintro
if seci.height2.i831_ = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i832m3 height reason not complete -3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.height2.i832_[3]
height
why weren't you able to measure r's height?
iwer: enter all that apply
.................................................................................
1. r felt it would not be safe
1 2. iwer felt it would not be safe
2 3. r refused or was not willing to complete the measurement
1 4. r tried but was unable to complete measurement
5. r did not understand the instructions
6. respondent too tall, interviewer could not reach
2 7. no suitable space available
8. problem with equipment or supplies
9. r is not able to stand; other health reason
11 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20895 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i659_i660_dataentryintro
if seci.height2.i831_ = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i832m4 height reason not complete -4
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.height2.i832_[4]
height
why weren't you able to measure r's height?
iwer: enter all that apply
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the measurement
4. r tried but was unable to complete measurement
5. r did not understand the instructions
6. respondent too tall, interviewer could not reach
7. no suitable space available
8. problem with equipment or supplies
9. r is not able to stand; other health reason
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20911 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i659_i660_dataentryintro
if seci.height2.i831_ = no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i832m5 height reason not complete -5
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.height2.i832_[5]
height
why weren't you able to measure r's height?
iwer: enter all that apply
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the measurement
4. r tried but was unable to complete measurement
5. r did not understand the instructions
6. respondent too tall, interviewer could not reach
7. no suitable space available
8. problem with equipment or supplies
9. r is not able to stand; other health reason
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.height2.i832_
if seci.height2.i831_ = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i834 height measurment
section: i level: respondent type: numeric width: 5 decimals: 2
ref: seci.height2.i834_heightinches
height
enter respondent's height in inches. round to the nearest quarter inch.
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8051 6 88 65.13 4.19 12854
-----------------------------------------------------------------
7 98. dk (don't know); na (not ascertained)
99. rf (refused)
构造变量
{previous ask} seci.height2.i834_heightinches
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i837 height wearing shoes
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.height2.i837_
height
was r wearing shoes during measurement?
.................................................................................
403 1. yes
7653 5. no
2 8. dk (don't know); na (not ascertained)
9. rf (refused)
12854 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i659_i660_dataentryintro
if seci.xweightceligible = yes then
if (pii982_askweight <> no) and (piseccweighc139_ < 300) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i838 weight able to measure
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.rweight2.i838_
weight
were you able to measure r's weight?
.................................................................................
7790 1. yes
369 5. no
12753 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i659_i660_dataentryintro
if seci.xweightceligible = yes then
if seci.rweight2.i838_ = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i841 weight pounds measurment
section: i level: respondent type: numeric width: 5 decimals: 1
ref: seci.rweight2.i841_weightpounds
weight
enter respondent's weight in pounds as recorded on scale (to the nearest 0.5
pound).
iwer: enter [993] if r tried but received an error message.
iwer: enter [999] if r chose not to do it.
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
7786 48.5 334 182.18 41.41 13122
-----------------------------------------------------------------
1 993. r tried but received an error message
2 998. dk (don't know); na (not ascertained)
1 999. r chose not to do it
构造变量
{previous ask} seci.rweight2.i841_weightpounds
if (seci.rweight2.i841_weightpounds <> 993) and
(seci.rweight2.i841_weightpounds <> 999) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i842 weight floor surface
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.rweight2.i842_weightflooring
weight
record type of floor surface
iwer: if you used the support tile, please record the surface on which the tile
was placed.
.................................................................................
6842 1. linoleum/tile/wood
696 2. low-pile carpet
36 3. high-pile carpet
195 4. concrete/brick
3 5. not sure
10 7. other (specify)
6 8. dk (don't know); na (not ascertained)
13124 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.rweight2.i842_weightflooring
if (((seci.rweight2.i842_weightflooring = lowpile) or
(seci.rweight2.i842_weightflooring = highpile)) or
(seci.rweight2.i842_weightflooring = notsure)) or
(seci.rweight2.i842_weightflooring = other_specify) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i666 scale-support tile used=
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.rweight2.i666_supporttile
weight
did you use the scale-support tile?
.................................................................................
697 1. yes
47 5. no
1 8. dk (don't know); na (not ascertained)
9. rf (refused)
20167 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.rweight2.i842_weightflooring
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i844 weight wearing shoes
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.rweight2.i844_
weight
was r wearing shoes during measurement?
.................................................................................
385 1. yes
7398 5. no
5 8. dk (don't know); na (not ascertained)
9. rf (refused)
13124 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i659_i660_dataentryintro
if seci.xweightceligible = yes then
if ((seci.rweight2.i838_ = no) or (seci.rweight2.i841_weightpounds = 993)) or
(seci.rweight2.i841_weightpounds = 999) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i839m1 weight reason not complete -1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.rweight2.i839_[1]
weight
why weren't you able to measure r`s weight?
iwer: enter all that apply.
.................................................................................
96 1. r felt it would not be safe
19 2. iwer felt it would not be safe
140 3. r refused or was not willing to complete the measurement
6 4. r tried but was unable to complete the measurement
1 5. r did not understand the instructions
3 6. respondent was too heavy; did not attempt
5 7. no suitable space available
67 8. scale did not work; other problem with equipment or supplies
33 9. r is not able to stand or balance on scale; other health
reason
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20541 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i659_i660_dataentryintro
if seci.xweightceligible = yes then
if ((seci.rweight2.i838_ = no) or (seci.rweight2.i841_weightpounds = 993)) or
(seci.rweight2.i841_weightpounds = 999) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i839m2 weight reason not complete -2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.rweight2.i839_[2]
weight
why weren't you able to measure r`s weight?
iwer: enter all that apply.
.................................................................................
1 1. r felt it would not be safe
40 2. iwer felt it would not be safe
7 3. r refused or was not willing to complete the measurement
1 4. r tried but was unable to complete the measurement
1 5. r did not understand the instructions
1 6. respondent was too heavy; did not attempt
7. no suitable space available
8. scale did not work; other problem with equipment or supplies
1 9. r is not able to stand or balance on scale; other health
reason
5 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20855 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i659_i660_dataentryintro
if seci.xweightceligible = yes then
if ((seci.rweight2.i838_ = no) or (seci.rweight2.i841_weightpounds = 993)) or
(seci.rweight2.i841_weightpounds = 999) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i839m3 weight reason not complete -3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.rweight2.i839_[3]
weight
why weren't you able to measure r`s weight?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
5 3. r refused or was not willing to complete the measurement
2 4. r tried but was unable to complete the measurement
5. r did not understand the instructions
2 6. respondent was too heavy; did not attempt
1 7. no suitable space available
8. scale did not work; other problem with equipment or supplies
9. r is not able to stand or balance on scale; other health
reason
11 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20891 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i659_i660_dataentryintro
if seci.xweightceligible = yes then
if ((seci.rweight2.i838_ = no) or (seci.rweight2.i841_weightpounds = 993)) or
(seci.rweight2.i841_weightpounds = 999) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i839m4 weight reason not complete -4
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.rweight2.i839_[4]
weight
why weren't you able to measure r`s weight?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the measurement
4. r tried but was unable to complete the measurement
5. r did not understand the instructions
6. respondent was too heavy; did not attempt
7. no suitable space available
8. scale did not work; other problem with equipment or supplies
9. r is not able to stand or balance on scale; other health
reason
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
构造变量
assign: waist2.i904_waistcomplete := no if not(wcircum in waist.i687_hwwdir)
or (all in waist.i687_hwwdir) and if waist.x687 <> waist.i687_hwwdir
if pii985_askwaist <> no then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i904 waist complete
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.waist2.i904_waistcomplete
waist circumference
were you able to measure r's waist circumference?
.................................................................................
8059 1. yes
255 5. no
12598 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i659_i660_dataentryintro
if seci.waist2.i904_waistcomplete = yes then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i907 waist measurment
section: i level: respondent type: numeric width: 6 decimals: 2
ref: seci.waist2.i907_waistmeasurement
waist circumference
enter respondent's waist measurement to the nearest quarter inch.
iwer: enter [993] if r tried but was unable to do it.
iwer: enter [999] if r chose not to do it.
.................................................................................
-----------------------------------------------------------------
n min max mean sd miss
8045 0.5 85.5 40.61 6.40 12853
-----------------------------------------------------------------
12 99-190. out of range
993. r tried but was unable to complete the test
2 998. dk (don't know); na (not ascertained)
999. r chose not to do it
构造变量
{previous ask} seci.waist2.i907_waistmeasurement
if (seci.waist2.i907_waistmeasurement <> 993) and
(seci.waist2.i907_waistmeasurement <> 999) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i908m1 waist difficulties -1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.waist2.i908_waistdifficulties[1]
waist circumference
what difficulties occurred during this measurement?
iwer: enter all that apply
.................................................................................
8001 1. none
3 2. r had breathing difficulties
8 3. r was unable to hold breath at end of exhale
24 4. r was prevented from giving full effort by illness, pain, or
other symptoms or discomforts
3 5. r did not appear to give full effort, but no obvious reason
for this.
7 6. had difficulty or unable to locate navel
9 97. other (specify)
4 98. dk (don't know); na (not ascertained)
99. rf (refused)
12853 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.waist2.i907_waistmeasurement
if (seci.waist2.i907_waistmeasurement <> 993) and
(seci.waist2.i907_waistmeasurement <> 999) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i908m2 waist difficulties -2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.waist2.i908_waistdifficulties[2]
waist circumference
what difficulties occurred during this measurement?
iwer: enter all that apply
.................................................................................
1. none
2 2. r had breathing difficulties
3. r was unable to hold breath at end of exhale
4. r was prevented from giving full effort by illness, pain, or
other symptoms or discomforts
5. r did not appear to give full effort, but no obvious reason
for this.
6. had difficulty or unable to locate navel
2 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20908 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.waist2.i907_waistmeasurement
if (seci.waist2.i907_waistmeasurement <> 993) and
(seci.waist2.i907_waistmeasurement <> 999) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i908m3 waist difficulties -3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.waist2.i908_waistdifficulties[3]
waist circumference
what difficulties occurred during this measurement?
iwer: enter all that apply
.................................................................................
1. none
2. r had breathing difficulties
3. r was unable to hold breath at end of exhale
4. r was prevented from giving full effort by illness, pain, or
other symptoms or discomforts
5. r did not appear to give full effort, but no obvious reason
for this.
6. had difficulty or unable to locate navel
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.waist2.i908_waistdifficulties
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i911 waist who measured
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.waist2.i911_waistwhomeasured
waist circumference
who completed the measurement?
.................................................................................
5943 1. r completed the measurement
2112 2. iwer completed the measurement
4 8. dk (don't know); na (not ascertained)
12853 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.waist2.i911_waistwhomeasured
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i912 waist bulky clothes
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.waist2.i912_waistbulkyclothes
waist circumference
was r wearing bulky clothing during this measurement?
.................................................................................
208 1. yes
7846 5. no
5 8. dk (don't know); na (not ascertained)
12853 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i659_i660_dataentryintro
if ((seci.waist2.i904_waistcomplete = no) or (seci.waist2.i907_waistmeasurement
= 993)) or (seci.waist2.i907_waistmeasurement = 999) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i905m1 waist why not complete-1
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.waist2.i905_waistwhynotcomplete[1]
waist circumference
why weren't you able to measure r's waist?
iwer: enter all that apply.
.................................................................................
84 1. r felt it would not be safe
21 2. iwer felt it would not be safe
113 3. r refused or was not willing to complete the measurement
4 4. r tried but was unable to complete measurement
2 5. r did not understand the instructions
22 6. r is not able to stand
4 7. no suitable space
4 8. problem with equipment or supplies
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20657 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i659_i660_dataentryintro
if ((seci.waist2.i904_waistcomplete = no) or (seci.waist2.i907_waistmeasurement
= 993)) or (seci.waist2.i907_waistmeasurement = 999) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i905m2 waist why not complete-2
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.waist2.i905_waistwhynotcomplete[2]
waist circumference
why weren't you able to measure r's waist?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
34 2. iwer felt it would not be safe
9 3. r refused or was not willing to complete the measurement
1 4. r tried but was unable to complete measurement
5. r did not understand the instructions
2 6. r is not able to stand
7. no suitable space
8. problem with equipment or supplies
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20865 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i659_i660_dataentryintro
if ((seci.waist2.i904_waistcomplete = no) or (seci.waist2.i907_waistmeasurement
= 993)) or (seci.waist2.i907_waistmeasurement = 999) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i905m3 waist why not complete-3
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.waist2.i905_waistwhynotcomplete[3]
waist circumference
why weren't you able to measure r's waist?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
1 2. iwer felt it would not be safe
5 3. r refused or was not willing to complete the measurement
1 4. r tried but was unable to complete measurement
5. r did not understand the instructions
10 6. r is not able to stand
7. no suitable space
8. problem with equipment or supplies
2 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20893 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i659_i660_dataentryintro
if ((seci.waist2.i904_waistcomplete = no) or (seci.waist2.i907_waistmeasurement
= 993)) or (seci.waist2.i907_waistmeasurement = 999) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i905m4 waist why not complete-4
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.waist2.i905_waistwhynotcomplete[4]
waist circumference
why weren't you able to measure r's waist?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the measurement
4. r tried but was unable to complete measurement
5. r did not understand the instructions
2 6. r is not able to stand
7. no suitable space
8. problem with equipment or supplies
1 97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20909 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i659_i660_dataentryintro
if ((seci.waist2.i904_waistcomplete = no) or (seci.waist2.i907_waistmeasurement
= 993)) or (seci.waist2.i907_waistmeasurement = 999) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i905m5 waist why not complete-5
section: i level: respondent type: numeric width: 2 decimals: 0
ref: seci.waist2.i905_waistwhynotcomplete[5]
waist circumference
why weren't you able to measure r's waist?
iwer: enter all that apply.
.................................................................................
1. r felt it would not be safe
2. iwer felt it would not be safe
3. r refused or was not willing to complete the measurement
4. r tried but was unable to complete measurement
5. r did not understand the instructions
6. r is not able to stand
7. no suitable space
8. problem with equipment or supplies
97. other (specify)
98. dk (don't know); na (not ascertained)
99. rf (refused)
20912 blank. inap (inapplicable); partial interview
构造变量
assign: i936_physmeasbio_completionflag := completesome:{previous ask}
seci.i600_pmconsentintro
if ((seci.i802_pmconsent = yes) or (seci.saliva.i913_salivaconsent = yes)) or
(seci.bloodspot.i922_bloodconsent = yes) then
assign: i936_physmeasbio_completionflag := notcompleteany:{previous ask}
seci.i600_pmconsentintro
if not(((seci.i802_pmconsent = yes) or (seci.saliva.i913_salivaconsent = yes))
or (seci.bloodspot.i922_bloodconsent = yes)) then
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i936 finish phy measures
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.i936_physmeasbio_completionflag
iwer: enter 1 - if r completed at least some measurements
iwer: enter 5 - if r did not complete any measurements
.................................................................................
8454 1. completed at least some measurements
484 5. did not complete any measurements
8. dk (don't know); na (not ascertained)
9. rf (refused)
11974 blank. inap (inapplicable); partial interview
构造变量
{previous ask} seci.i600_pmconsentintro
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
i845 finish phy measures entry
section: i level: respondent type: numeric width: 1 decimals: 0
ref: seci.i845_
[you have completed entering the physical measurements and biomarkers]
iwer: enter [1] to continue and complete this interview.
.................................................................................
8900 1. continue
12012 blank. inap (inapplicable); partial interview
vdate 2016 data model version
section: i level: respondent type: numeric width: 2 decimals: 0
user note: this variable identifies which data model was used to interview the
household. please reference the data description for a summary of changes in
each data model.
.................................................................................
235 1. version 1
1172 2. version 2
1817 3. version 3
3140 4. version 4
4251 5. version 5
702 6. version 6
2007 7. version 7
1038 8. version 8
1330 9. version 9
3703 10. version 10
155 11. version 11
605 12. version 12
757 13. version 13
version 2016 data release version
section: i level: respondent type: numeric width: 1 decimals: 0
.................................................................................
20912 2. hrs 2016 final release